PA_E series
10Pages

DATA SHEET CURRENT SENSOR - LOW TCR AUTOMOTIVE GRADE PA_E series 5%, 1% sizes 2512 Product specification– April 07, 2016 V.3 RoHS compliant & Halogen free

Product specification Chip Resistor Surface Mount ORDERING INFORMATION - GLOBAL PART NUMBER This specification describes PA series current sensor - low TCR with lead-free terminations made by metal substrate. Global part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. GLOBAL PART NUMBER PA XXXX X X X XX XXXX E (1) APPLICATIONS  Consumer goods  Computer  Telecom / Datacom  Industrial / Power supply  Alternative Energy  Car electronics FEATURES  AEC-Q200 qualified  Halogen-free Epoxy  RoHS compliant ...

Product specification Chip Resistor Surface Mount 4 digits The “R” is used as a decimal point; the other 3 digits are significant PA2512: 1mΩ to 4 mΩ Fig. 1 4 digits The “R” is used as a decimal point; the other 3 digits are significant PA2512: 5 mΩ to 50 mΩ CONSTRUCTION The resistors are constructed using outstanding TCR level material, which makes Yageo P A resistors excellent for current sensing application in battery charger circuit & DC -DC converter. The composition of the resistive material is adjusted to give the approximate required resistance and is covered with a protective...

YAGEO Phicomp Product specification Table I For outlines, please refer to Fig. 4 TYPE RESISTANCE RANGE POWER RATING_L (mm) W (mm) H (mm) I, (mm) b (mm) I. For relevant physical dimensions, please refer to construction outlines. 2. Please contact with sales offices, distributors and representatives in your region before ordering. SERIES SIZE POWER RATING TOLERANCE RESISTANCE TEMPERATURE COEFFICIENT OF PA 2512 |W 2W 3W ±\%,±5% I mQ < R< 50mQ +100 ppm/°C, +75 ppm/°C, ±50 ppm/°C Note: Please contact with sales offices, distributors and representatives in your region before ordering. OPERATING...

Product specification Chip Resistor Surface Mount PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE REEL DIMENSION Embossed taping reel (K) EMBOSSED TAPE Table 4 Dimensions of embossed tape for relevant chip resistors size SIZE

YAGEO Phicomp Product specification Chip Resistor Surface Mount I PA_E I SERIES | 2512 REEL SPECIFICATION Table 5 Dimensions of reel specification for relevant chio resistors size REEL SIZE SYMBOL TAPE WIDE TAPE WIDE LEADER/TRAILERTAPE SPECIFICATION empty compartments - with cover tape -cover tape only-

Product specification Chip Resistor Surface Mount FOOTPRINT AND SOLDERING PROFILES For recommended soldering profiles, please refer to data sheet “Chip resistors mounting”. FOOTPRINT Fig. 9 Single resistor chips recommended dimensions of footprints Table 6 Footprint dimensions RESISTANCE RANGE Unit: mm POWER RATING

Product specification Chip Resistor Surface Mount TESTS AND REQUIREMENTS Table 8 Test condition, procedure and requirements TEST TEST METHOD Short time overload High Temperature Exposure 5 times of rated power for 5 seconds at room temperature 1,000 hours at maximum operating temperature depending on specification, unpowered No direct impingement of forced air to the parts Tolerances: 170± 3ºC Temperature Cycling 1,000 cycles, -55/+125ºC for 1 cycle per hour Moisture Resistance Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25ºC /...

Product specification Chip Resistor Surface Mount TEST METHOD Electrostatic Discharge Solderability - Wetting Human Body Model, 1 pos + 1 neg. (a) Method B, aging 4 hours at 155ºC dry heat, dipping at 235± 3ºC for 5± 0.5 seconds. Well tinned (>95% covered) No visible damage (b) Method B, steam aging 8 hours, dipping at 215± 3ºC for 5± 0.5 seconds. (c) Method D, steam aging 8 hours, dipping at 260± 3 ºC for 7± 0.5 seconds. Try to inflame a specimen by a needle flame Board Flex / Bending Chips mounted on a 90mm glass epoxy resin PCB (FR4), Bending for 2512=2 mm Holding time: Min.60 seconds...

Product specification Chip Resistor Surface Mount REVISION HISTORY REVISION CHANGE NOTIFICATION TOLERANCE - Update TCR RESISTANCE RANGE TEMPERATURE COEFFICIENT OF RESISTANCE - Extend resistor value 4 mΩ ≦ R < 100 mΩ 3 mΩ ≦ R < 100 mΩ - Update tests and requirements The resistors are constructed using outstanding TCR level Version 0 Mar.material, which makes Yageo PF 18, 2015 resistors excellent for current sensing application in battery charger circuit & DC-DC converter. The composition of the resistive PF 2010 material is adjusted to give the approximate required resistance and is covered...