PartProlOO xP ■ Print Technology Print Technology DLP Technology Max. Build Area (WxDxH) 2.52" x 1.57" x 4.72" (64 x 40 x 120 mm ) * For the objects with dimension of cross section larger than 100 mm x 100 mm, please consider dividing them in multiple parts that can be assembled after printing. Layer Resolution 25 / 50 / 100 microns Light Source UV LED A 405nm Printing Software XYZware_VPD Supported File Formats .stl / XYZ format (.3ws / .3wn) Material Compatibility ProUtility / ProAccure / ProHighTemp User Interface 2.6” FSTN LCM Language Multilingual Connectivity USB 2.0 Cable / USB Flash Drive / Wi-Fi MAC OS X 10.10 / 10.11 / 10.12 / 10.13 Note: Stardard VGA driver on operating system, or a graphics card doesn't support OpenGL 2.1, may cause unknown error in XYZware_Nobel. Minimum Hardware Requirements For PC: OS: 32-bit operating system / RAM: 4GB or more /Graphics RAM: 1GB / Hard disk space: 1GB or more For Mac: RAM: 8GB or more / Graphics RAM: OpenGL 2.1+ compatible / Hard disk space: 1GB or more Recommended Hardware For PC: OS: 64-bit operating system / RAM: 8GB / Graphics RAM: 4GB or more / Hard disk space: 1GB or more *If a different operating temperature is printed on the label on the resin bottle, please adhere to recommended conditions on the label. Operation Humidity 40 ~ 60 % RH (no condensation) Storage Temperature-Resin 10 ~ 32°C / 50 ~ 89.6 °F ■ Size & Weight Product Dimensions (WxDxH) 11.4" x 14.06" x 16.81" (290 x 357 x 427 mm) Product Weight 11 kg Packed Dimensions (WxDxH) 19.69" x 15.55" x 22.83" (500 x 395 x 580 mm) Packed Weight 14 kg (30.86 lbs)