7” & 8” ELECTRIC REMOTE CONTROL SEARCHLIGHTS - 4 Pages

Add to MyDirectIndustry favorites
7” & 8” ELECTRIC REMOTE CONTROL SEARCHLIGHTS

Catalog excerpts

a xylem brand 7" & 8" ELECTRIC REMOTE CONTROL SEARCHLIGHTS FEATURES • Complete drive unit enclosed in light housing. • Single control lever for vertical and horizontal movement. • Dual speed control for precise beam movement. • On-off Spot only on 7" and 8"models. • Exclusive Clutch-A-Matic feature protects drive unit against overload. Can operate for extended periods against limit stops without harm. Light head may be moved manually without damage to the drive unit. • Internal brake system holds beam firmly on target. • Includes control with on-off, dual speed control, and single control for vertical and horizontal movement. Model Bulb Candlepower Number Volts Head Base Type (Combined) 10' Cable Assembly 15' Cable Assembly 25' Cable Assembly 35' Cable Assembly 50' Bulk Cable Models 62040-4 Series & 62042-4 Series

 Open the catalog to page 1

LIGHT MOUNTING See base mounting dimensions for appropriate model light. Mount all models with front of base toward direction of most intended use (front of circular base is marked with arrow). Drill screw holes (per dimensional drawing) and a 1-1/8" (28mm) hole at center of base for wiring cable. Drill additional holes for wiring cable through firewalls, bulkheads, etc., for connection to control. With gasket under light base, feed wire through hole and fasten light in place. NOTE: Cable connectors are provided for easy wiring connections. See Wiring Diagram. CONTROL MOUNTING 43670-0003 12...

 Open the catalog to page 2

Key No. Part Description 62040-Series 62042-Series Part No. Qty. Part No. Qty. Base (includes set screw) 2 Housing (rubber boot installed) (includes end bell (No.8) on 7" & 8") Chrome - Brass Housing 3 Screws for mounting housing Rubber Boot (includes straps and fasteners) Motor Clutch Assembly (assembled and wired) Motor & Pinion Kit (vertical horizontal)* 7 Bulb Retaining Ring (chrome) (w/fasteners) 9 Gasket (base mount) Gear & Clutch Kit (not shown) Replacement 8-Way Switch for Control (not shown) ‘Vertical & horizontal refer to movement, not orientation or the motor inside the housing....

 Open the catalog to page 3

WIRING DIAGRAM SINGLE CONTROL POWER INPUT LEADS SUPPLIED BY CUSTOMER (16 GA.) CONTROLLED CABLE MUST BE ACQUIRED SEPARATELY (SEE CABLE LISTING) CONTROL BASE MOUNTING DIMENSIONS 8-5/16" (211mm) 7/32" (5,5mm) DIA. HOLES (3 PLCS) FOR NO.10 FLATHEAD SCREWS THE PRODUCTS DESCRIBED HEREIN ARE SUBJECT TO THE JABSCO ONE YEAR LIMITED WARRANTY, WHICH IS AVAILABLE FOR YOUR INSPECTION UPON REQUEST. © 2014 Xylem Inc. All right reserved. Jabsco is a trademark of Xylem Inc. or one of its subsidiaries.

 Open the catalog to page 4

All Xylem France catalogs and technical brochures

  1. Harmful Algae

    12 Pages