*mydirectindustry

VE8 Slew Drive catalog

Product catalog summary

Overview: The document provides technical specifications and design details for the VE8DN34 slewing drive, a mechanical component used for rotational motion control. The unit of measurement is millimeters, with a conversion of 1 inch equaling 25.4 mm. The weight of the slewing drive is approximately 50 kg.

Design and Customization: The slewing drive can be custom-designed based on customer requirements. The provided drawings are for reference only and are subject to change without prior notice due to new designs.

Performance Parameters:

Holding Torque: 45 kN.m (33210 lbf.ft)
Rated Output Torque: 4500 N.m (3321 lbf.ft)
Maximum Output Torque: 6500 N.m (4797 lbf.ft)
Gear Ratio: 516.7:1
Precision Tracking: ≤0.3°
IP Class: IP65

Electrical Specifications:

Rated Voltage: 24 VDC
Rated Speed: 9.5 rpm
Rated Current: ≤3.6A

Output Shaft: The type and size of the output shaft can be customized. The standard size is square (SS142) with dimensions 142×142 mm.

Additional Features: The slewing drive includes a grease plug and a mechanical hard stop for operational safety and maintenance.

Catalog excerpts

SIDE VIEW Holding Torque Gear Ratio Tracking Precision Rated Output Torque Slewing Drive Performance Parameters SLEWING DRIVE 回转式减速器 24VDC Planetary Reducer Motor Performance Data Hard Stop SPECIAL DESIGN BASE ON CUSTOMER’S REQUIREMENT 可根据顾客的要求进行非标设计 Rated Voltage Rated Speed Rated Torque Rated Current Type of output shaft Square 方形(max.)

Open the catalog to page 1

VE8 Slew Drive catalog

VE8 Slew Drive catalog

Catalog excerpts

All XUZHOU FENGHE SLEWING BEARING CO.,LTD catalogs and technical brochures