Solids Dispenser SDH-1 01 The handheld Solids Dispenser SDH-1 can dispense calibrated volumetric doses (and multiples) of solids in a highly precise and repeatable fashion. The SDH-1 increases lab productivity and at the same time ensures process accuracy. Compared to other techniques the volumetric dispensing is particularly fast (2.5-3.5sec. per dose), independant of dose size. Due to its compact handheld configuration it is easy to integrate in the workflow and alleviates tedious repetitive tasks . The dispensing heads are interchangeable to enable running several materials with different dose size and no cross-contamination. SDH-1 can be used to dispense typically from 2 mg up to 300 mg in a single shot (depending on material), or higher in incremental dispensing. Workflow Solids are introduced in the equipment by attaching standard glass vials. Two sizes of these vials are available. Dispensing heads are detachable and can be swapped for rapid change of material without cleaning and risk of cross-contamination. Powder doses can be selected in 1- 99 incremental volume steps with dispensing cycles displayed. Cordless rechargeable operation.

Performance Volumetric dispensing head calibrated to your specific requirement; can be swapped instantly for switching of materials and dose sizes without cross-contamination. Features Exchangeable calibrated dispensing disks (dosing element) to modify single dose size and/or adjusting to different bulk density 10x precalibrated dispensing disks covering the dose range of 2.5mm³ - 300mm³ included; or calibrated to specific single dose size Cradle Specifications Volumetric dose sizes in the range of 2.3 mm³ - 300 mm³ for small head (corresponds to dose of 5 mg to 300 mg, depending on bulk density...