Solids Dispenser SDB-2 01 The bench-top Solids Dispenser SDB-2 dispenses calibrated volumetric doses (and multiples) of solids in a highly precise and repeatable fashion. Compared to the otherwise similar SDB-1, it can dispense much larger dose sizes and has a bigger reservoir . The SDB-2 increases lab productivity and at the same time ensures process accuracy. Compared to other techniques the volumetric dispensing is particularly fast (3.0 sec. per dose), independant of dose size. Due to its compact benchtop configuration it is easy to integrate in the workflow and alleviates tedious repetitive tasks . The dispensing heads are interchangeable to enable running several materials with different dose size and no cross-contamination. The dispensing head is capable of dispensing from 20mg up to 78 g in a single shot (depending on density of material), or higher for incremental dispensing. We also offer customised solutions, e.g. for automation. Workflow Solids are introduced into the equipment by attaching containers. Containers can be customized to process requirements. Dispensing heads are detachable and can be swapped for rapid switch of material without cleaning and risk of cross-contamination. Powder doses can be selected in 1-99 incremental volume steps with dispensing cycles displayed.

Performance Volumetric dispensing head calibrated to your specific requirement Up to 99 pre-selectable repeat doses for higher volumes. Features Exchangeable dispensing heads, and volumetric dispensing disk. Specifications Volumetric dose sizes in the range of 10.0 mm³ - 78 ml (corresponds to dose of 10 mg to 78 g, depending on bulk density of material) Accuracy: +/- 3%, depending on materials Dosing cycle time: 3.0 sec. Container sizes 2,500-5,000 ml Size: W 250 mm x D 320mm x H 930 mm (with 5 l reservoir) Weight: 6.0 kg Power Supply switching: 115 V / 230 V Power rating: 15 W max, typical 9...