1. Catalogs
  2. XQ Instruments
  3. Brochure MCF-13A

Brochure MCF-13A

Brochure MCF-13A

Brochure MCF-13A

Product catalog summary
Overview
The Microcapper MCF-13A is a patented device designed to automate the attachment of screw caps on microtubes, enhancing laboratory productivity, occupational health and safety, and process integrity. It ensures consistent cap tightening to prevent leakage during transportation and reduces operator hand fatigue, mitigating risks such as carpal tunnel syndrome.

Design and Usability
The MCF-13A is compact, with a footprint smaller than half an A4 paper, and portable. It is user-friendly, requiring minimal training. Caps are poured into a feeder, and capping is initiated by inserting a microtube into a holder and pressing a button.

Workflow
Microtubes are placed in a holder, and capping is activated by a button press. The auto-feeder supplies caps to the capping station as needed. Capping torque is adjustable between 12 to 25 N-cm. The device operates with a simple capping button and an ON/OFF switch, with a standby mode when idle. A counter displays the number of capped microtubes, which can be reset.

Performance
Capping is continuous, with a speed of approximately 3 seconds per cap, limited by the operator. The device requires minimal maintenance.

Features
- Cap feeder
- Cap counter
- Automatic lifter
- Processes bulk caps and tubes

Specifications
- Micro-tube cap size: 13x6 mm (others available on request)
- Capping throughput: 20 caps/minute
- Capping torque: 12 to 25 N-cm, adjustable
- Dimensions: W 220 mm x D 365 mm x H 490 mm
- Weight: 11 kg
- Noise level: Less than 70 dB at 1 meter
- Power supply: Switching 115 V / 230 V AC
- Power rating: 250 W max

Contact Information
XentiQ Partners Pte Ltd, Alpha Industrial Building, 7 Toh Guan Road East #07-01; Singapore 608599 | Tel: +65 62540166 | Website: www.xqinstruments.com
See more

Catalog excerpts

Brochure MCF-13A-1

Microcapper MCF-13A 01 The patented Microcapper MCF-13A automates the attaching of screw caps on microtubes. It increases lab productivity, occupational health & safety and process integrity. Consistent tightening of the caps is ensured to prevent leakage during transportation. The MCF-13A reduces operator's hand fatigue and relieves the tedious task of hand capping. It is known that hazards such as carpal tunnel syndrome can result from the repetitive strain of manually tightening screw caps, making automated mechanical capping important. Designed for capping of screw caps on micro-tubes typically used in laboratories for the preparation and processing of samples and reagents, the MCF-13A can be set up for various cap, vial and tube sizes. The bench top device is compact with a footprint of less than half an A4 paper, and portable. The product is user friendly and can be operated with minimal training. Caps for the micro-tubes are poured into a feeder. Capping is done by inserting a micro-tube into tube-holder, and pushing a button. Workflow Microtubes are insert in a holder; capping activated by pressing a button. Caps are poured into auto-feeder at the top. As caps are consumed, auto-feeder will supply caps to the capping station automatically. Capping torque can be adjusted to requirements between 12 to 25 N-cm. Operated simply by a capping button and an ON/OFF power switch. Stand-by mode when idling. Counter shows the number of microtubes capped, resettable by a reset button.

 Open the catalog to page 1
Brochure MCF-13A-2

Performance Capping can be done in continuous fashion. Capping speed is approximately 3 seconds (limited by the operator). Requires little to no maintenance. Features Cap feeder Cap counter Automatic lifter Processing bulk caps and tubes Specifications Micro-tube cap size of 13x6 mm (others on request) Capping throughput 20 caps/minute Capping torque 12 to 25 N-cm, adjusted to your requirement Size: W 220 mm x D 365 mm x H 490 mm Weight: 11 kg Noise level less than 70 db at 1 meter. Power supply: Switching 115 V / 230 V AC Power rating: 250 W max XentiQ Partners Pte Ltd, Alpha Industrial Building,...

 Open the catalog to page 2

All XQ Instruments catalogs and technical brochures

  1. SDB-1-RS

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.