1. Catalogs
  2. XP Power
  3. WX Series 1000 Watt Regulated High Voltage DC Power Supplies

WX Series 1000 Watt Regulated High Voltage DC Power Supplies

WX Series 1000 Watt Regulated High Voltage DC Power Supplies

WX Series 1000 Watt Regulated High Voltage DC Power Supplies

Product catalog summary
Overview: The WX Series offers 1000 Watt regulated high voltage DC power supplies with outputs up to 75 kV. These units are designed for laboratory performance with enhanced features and a compact 5.25-inch panel height.
Compliance: Fully compliant with the European harmonized EMI directive, EN50082-2, and the low voltage directive, 73/23/EEC.
Key Features:
  • Pulse-Width Modulation: Provides high efficiency and reliability.
  • Air Insulated: Uses air as the primary dielectric medium, enhancing serviceability and reducing weight.
  • Constant Voltage/Current Operation: Automatic crossover protects against overloads, arcs, and short circuits.
  • Low Ripple: Less than 0.05% of rated voltage at full load.
  • Tight Regulation: Voltage regulation better than 0.005% for line variations and 0.01% + 1 mV/mA for load variations.
  • Front Panel Controls: Available in analog and digital versions with separate controls for voltage and current.
  • Warranty: Standard power supplies have a three-year warranty; OEM and modified supplies have a one-year warranty.
  • Size and Weight: Compact design with a net weight of less than 30 pounds.
Specifications:
  • Input: 198-242 V RMS, 48-63 Hz, single-phase.
  • Efficiency: Typically 83% at full load.
  • Output: Continuous, stable adjustment from 0 to rated voltage or current.
  • Stored Energy: Maximum of 6 Joules up to 50 kV, 9 Joules for 60 and 75 kV.
  • Voltage Regulation: Less than 0.005% for line variations.
  • Ripple: Less than 0.05% of rated voltage + 0.5 V RMS at full load.
  • Current Regulation: Less than 0.1% from short circuit to rated voltage.
  • Stability: 0.01% per hour after 1/2 hour warm-up.
  • Temperature Coefficient: 0.01%/degree C.
  • Protection: Automatic current regulation with fuses and surge-limiting resistors.
Options:
  • 240: 216-264 V input.
  • DM: 3-1/2 digit LCD panel meters.
  • NC: Blank front panel with power switch only.
  • CT: Current trip option.
  • ZR: Zero start interlock.
  • SS: Slow start ramp up to 30 seconds.
  • 5VC: 0-5 V voltage and current programming.
Models: Various models available with positive, negative, or reversible polarity, offering different voltage and current outputs.
See more

Catalog excerpts

WX Series 1000 Watt Regulated High Voltage DC Power Supplies-2

tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial", sans-serif; } .font1 { font:5.00pt "Arial", sans-serif; } .font2 { font:8.00pt "Arial", sans-serif; } .font3 { font:9.00pt "Arial", sans-serif; } .font4 { font:16.00pt "Arial", sans-serif; } .font5 { font:8.00pt "Franklin Gothic Medium", sans-serif; } .font6 { font:10.00pt "Georgia", serif; } .font7 { font:7.00pt "Impact", sans-serif; } .font8 { font:9.00pt "Times New Roman", serif; } .font9 { font:16.00pt "Times New Roman", serif; } Spcifications (From 5% to 100% rated voltage. Ail units operate down to zero output...

 Open the catalog to page 2

All XP Power catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.