FL Series 1500 Watt Regulated High Voltage DC Power Supplies

Product catalog summary

Overview: The FL Series is a sophisticated line of 1.5 kW regulated DC power supplies, offering voltages from 750 V to 1500 V. These units are rack-mountable, CE compliant, and fully RoHS compliant, designed for high voltage applications with low ripple and noise.

Compliance: The power supplies comply with European Directives including EN61000-3-2 for line harmonics, EN61010/IEC1010 for safety, EN61000-6-4 for emissions, and EN61000-6-2:2005 for immunity.

Key Features:

Universal Input: Operates over 90 VAC to 264 VAC with active power factor correction.
Floating Output: Allows grounding of either terminal for positive or negative supply operation.
Microcontroller Control: Features digital encoders for local adjustment and remote control via RS-232, RS-485, and USB.
Remote Analog Interface: User-selectable 0-5V or 0-10V programming and monitoring.
Parallel Operation: Up to four units can operate in parallel with active current sharing.
Low Ripple: Less than 0.05% RMS ripple at full load up to 1 MHz.
Constant Voltage/Current Operation: Automatic crossover for protection against overloads and short circuits.
Cooling: Automatic fan speed control based on temperature.

Specifications:

Input: 90-264 VAC, single-phase, 48-63Hz, with inrush current of 30 A max.
Efficiency: 84% typical at full load with a power factor of 0.99.
Output: Adjustable from 0 to rated voltage/current with high accuracy.
Protection: Includes automatic current regulation, thermal switches, and surge-limiting resistors.
Environmental: Operating temperature 0 to +40°C, humidity <90% RH, altitude up to 10,000 ft with de-rating.

Options:

Arc Quench: Inhibits HV output for 20 ms after each arc.
Arc Count: Monitors arc frequency and shuts down if excessive.
Slow Start Ramp: Configurable ramp times from 5 to 30 seconds.

Contact Information: Glassman High Voltage Inc., 124 West Main Street, High Bridge, NJ 08829-0317, USA. Phone: (908) 638-3800, Fax: (908) 638-3700, Website: www.glassmanhv.com

Catalog excerpts

FL Series 1500 Watt Regulated High Voltage DC Power Supplies-2

Dynamic Voltage Regulation: Analog Current Monitor: Userselectable 0 to +5 V or 0 to +10 V, equals 0 to Rated, with an accu- racy of .5% of reading + 0.2% of rated. Typical deviation is 1.5% of ratingwith recovery to within .5% of rat- ing in 2ms for load transients from 10% to 100% and 100% to 10%. Input: 90-264 VAC continuous,single-phase, 48-63Hz. The RMS input current at rated power is less than 20 A @ 100 VRMS input and less than 11 A @200 VRMS input. Output power is linearly de-rated from 100% to 90% between 100V and 90V input. RS232/485 Programming and Monitor Accuracy:Resolution: Ripple...

Open the catalog to page 2

FL Series 1500 Watt Regulated High Voltage DC Power Supplies-3

Rear Panel Elements. AC powerentry terminal strip, AC On indi- cator, ground stud, HV output connectors, multifunction DIP switch, Analog Interface Connector, RS-232/RS485 connec- tors, and USB connectors. FAULT Status : Active HIGH, indi-cates a fault condition. Logic can be reversed by selected switch on the rear panel. The continu- ously monitored faults are: Input Undervoltage, Over Temperature, Over Voltage, Over Current, Interlock and (optional) Arc Fault. Dimensions (W X H X D): 19" X 1.72" X20". Refer to the outline drawing. Weight: 15 lbs (6.9 kg) AC Input Connector: Screw TerminalBlock,...

Open the catalog to page 3

FL Series 1500 Watt Regulated High Voltage DC Power Supplies-4

Outline > Designing Solutions for High Voltage Power Supply Applications GLASSMAN HIGH VOLTAGE INC . > 124 West Main Street, PO Box 317, High Bridge, NJ 08829-0317(908) 638-3800 Fax (908) 638-3700 Օ www.glassmanhv.com size="-2">

Open the catalog to page 4