EK Series 600W Regulated High Voltage DC Power Supplies

Product catalog summary

Overview: The EK Series by Glassman High Voltage Inc. consists of sophisticated 600W high voltage DC power supplies, offering outputs from 1 kV to 60 kV. These units are designed for laboratory performance and are compliant with CE and Semi S2-93 standards.

Specifications: The power supplies feature low ripple and noise, air insulation, and fast response with tight regulation. They comply with the European Harmonized EMI Directive EN50082-2 and the European Low Voltage Directive 73/23/EEC. Input requirements are 102 - 132 V RMS, single-phase, 48-63 Hz, with a maximum of 1200 VA at full load. Efficiency is typically greater than 85% at full load.

Features: Key features include Arc Quench and Arc Sensing for arc management, Pulse-Width Modulation for high efficiency, and Constant Voltage/Constant Current operation for overload protection. The units also have redundant thermal overload protection and tight voltage and current regulation.

Performance: Ripple is less than 0.02% RMS of rated voltage at full load. Voltage regulation is better than 0.005%, and current regulation is better than 0.1%. Stability is 0.01% per hour after a 30-minute warm-up, and the temperature coefficient is 0.01%/°C.

Protection: The power supplies offer automatic current regulation, thermal switches, RPM sensing fans, fuses, surge-limiting resistors, and low energy components for comprehensive protection.

Models: The series includes models ranging from 0 to 1 kV up to 0 to 60 kV, with various current ratings and stored energy capacities. Options include different input voltages, power factor correction, and additional features like slow start ramp and current trip.

Warranty: Standard power supplies come with a three-year warranty, while OEM and modified units have a one-year warranty.

Contact Information: Glassman High Voltage Inc. is located in High Bridge, NJ, with additional offices in Europe and Japan.

Catalog excerpts

EK Series 600W Regulated High Voltage DC Power Supplies-2

External Interlock: Open = off, closed = on. Normally latching except for blank front panel version where it is non-latching. Front Panel Elements. The front panelcontainsall local control functions.These control functionsare: AC poweron/off switch and pilot light, separate 10-turn controls with locking vernier dials used to set voltage and currentlevels, and a high voltage ON switch.LEDs indicate when high voltage is on, output polarity, and whether the supply is operating in a voltage or current regulating mode. Output levels are indicated by voltage and current digital meters. Rear Panel Elements...

Open the catalog to page 2

EK Series 600W Regulated High Voltage DC Power Supplies-4

Designing Solutions for High Voltage Power Supply Applications 124 West Main Street,PO Box 317,High Bridge,NJ 08829-0317(908) 638-3800 ? Fax (908) 638-3700 ? www.glassmanhv.com >

Open the catalog to page 4

EK Series 600W Regulated High Voltage DC Power Supplies

EK Series 600W Regulated High Voltage DC Power Supplies

Catalog excerpts

All XP Power catalogs and technical brochures