Precautions for slag pots in steel plant when tipping over When the steel plant slag pot is tipped over, it should be noted that the tilting angle of the tilting slag pot needs to be less than 116 degrees. When dumping the slag, it is necessary to select the topography to prevent the slag shell from accidentally hurting people when the slag is poured. 1. The slag pot carrier needs to take a good stop wheel operation before it can turn over the slag tank at a long distance. When turning the slag tank, everyone must stay away from the slag pot carrier. 2. It is also necessary to supply power when turning over the slag tank. This requires the use of some concealed plugs. Soft cables can be used, which need to be operated 30 meters away from the slag tank. 3. When the heavy slag pot cannot turn over the slag, it is necessary to wait for the slag to completely solidify before processing. The slag pot is a casting that is often used by steel plant. Therefore, customers will choose some relatively large-scale casting foundries when they choose. They must have professional casting equipment, so that the quality of steel castings can be assured and the service life is guaranteed. CHAENG has a strong technical team and meticulous production planning, as well as complete casting equipment, testing methods and testing equipment, large-scale machining capabilities allow you to fully enjoy our "three-hearted service"! CHAENG looks forward to working with you ! ! !