X Series Ir : 3 A
12Pages

{{requestButtons}}

Catalog excerpts

X Series Ir : 3 A - 1

Description Alloy Thermal-Link / Alloy Thermal Cutoff (ATCO) is defined as a non-resettable protective device functioning one time only. It is widely used in electrical equipment. ATCO is mainly consist of fusible alloy, flux resin, case, sealant and lead wires. Normally, fusible alloy is jointed to the two lead temp. of ATCO, the fusible alloy melts and quickly retracts to the two lead wire ends with the aid of the flux resin and disconnects the circuit completely. Transparent Plastic Case Switched-Mode Power Supplies High Accuracy of Functioning Temp. Home Electrical Appliances RoHS & REACH Compliant Other Temp. The Length of Lead Wires Taping Packing Available Lead Wires can be Insulated Tinned Copper Wires or CP Wires +86 592-5715-838 www.SETsafe.com www.SETfuse.com E-mail : sales@SETfuse.com All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2021-2023 V2.1 wires. Under abnormal conditions, whe

Open the catalog to page 1
X Series Ir : 3 A - 2

Agency Approvals File No. Structure Diagrams Fusible Alloy Flux Resin Case Sealant Epoxy Lead Wire Before Functioning After Functioning Marking Trademark Rated Functioning Temp. Agency Mark Date Code RoHS & REACH +86 592-5715-838 www.SETsafe.com www.SETfuse.com E-mail : sales@SETfuse.com All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2021-2023 V2.1

Open the catalog to page 2
X Series Ir : 3 A - 3

Part Numbering System ATCO - X 2 - A N N A B - 001 Other Options Packing B: Bulk T: Taping Leads Forming A: Straight Lead B: Single Lead Bending C: Leads Bending D: Leads Kinking E: Leads Bending and Kinking Color of Insulation Tube W: White Y: Yellow N: None Insulation Tube Material T: Teflon P: Polyester N: None Lead Wire Type A: Tinned Copper Wire B: Tinned Copper Plated Wire Rated Functioning Temp. 2: 115 °C, See Specifications Series X Product Category ATCO Leads Forming Types The below leads forming is for reference, more leads forming can be customized. Straight Lead Single Lead...

Open the catalog to page 3
X Series Ir : 3 A - 4

Glossary Item Description Thermal-Link A non-resettable device incorporating a THERMAL ELEMENT which will open a circuit once only when exposed for a sufficient length of time to a temperature in excess of that for which it has been designed. Alloy Thermal-Link Alloy Type Thermal-Link, Alloy is the thermal element. Rated Functioning Temp. The temperature of the Alloy Thermal-Link which causes it to change the state of conductivity with a detection current up to 10 mA as the only load. Tolerance: Tf Tolerance: Tf ± 7 °C (J60691). Fusing Temp. Fusing Temp. The temperature of the Alloy...

Open the catalog to page 4
X Series Ir : 3 A - 5

Fusing Temp. RoHS、 REACH

Open the catalog to page 5
X Series Ir : 3 A - 6

Product Temp.-Time Curve (Reference) The Temp.-Time Curve of Thermal-Link in different temp. oil bath. +86 592-5715-838 www.SETsafe.com www.SETfuse.com E-mail : sales@SETfuse.com

Open the catalog to page 6
X Series Ir : 3 A - 7

Product Current-Time Curve (Reference) The Current-Time Curve shows functioning time at multi-times rated current at room temperature 25 ± 2 °C. +86 592-5715-838 www.SETsafe.com www.SETfuse.com E-mail : sales@SETfuse.com All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2021-2023 V2.1

Open the catalog to page 7
X Series Ir : 3 A - 8

Packaging Information Bulk PE Bag +86 592-5715-838 www.SETsafe.com www.SETfuse.com E-mail : sales@SETfuse.com All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2021-2023 V2

Open the catalog to page 8
X Series Ir : 3 A - 9

+86 592-5715-838 www.SETsafe.com www.SETfuse.com E-mail : sales@SETfuse.com All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2021-2023

Open the catalog to page 9
X Series Ir : 3 A - 10

ATTENTION Usage 1. When atmosphere pressure is from 80 kPa to 106 kPa, the related altitude shall be from 2000 meter to - 500 meter. 2. Operating voltage less than rated voltage of ATCO, operating current less than rated current of ATCO. 3. Do not touch the ATCO body or lead wires directly when power is on, to avoid burn or electric shock. Replace ATCO is a non-repairable product. For safety sake, it shall be replaced by an equivalent ATCO from the same manufacturer, and mounted in the same way. Storage Do not store the ATCO at the high temp., high humidity or corrosive gas environment,...

Open the catalog to page 10
X Series Ir : 3 A - 11

Mechanical Connection Riveting 1. Choose small resistivity riveting material and be riveted. 2. A flexible lead or lead with low resistance should be used to rivet the ATCO. Soldering Hand-Soldering 1. Soldering should be carried out according to Table X-1. 2. The thermal element of ATCO is fusible alloy with low melting point, which is jointed with ATCO lead wires. Improper soldering operation (too high soldering temp. , too long soldering time, too short lead wire etc.) may transfer more heat to the thermal element and ATCO may open in advance. 3. When soldering conditions are more severe...

Open the catalog to page 11
X Series Ir : 3 A - 12

TABLE X-2 Wave Soldering Parameters Setting Max. Allowable Preheating Temp. When the Length of Lead Wire is Different (Fig.X-1) Ls Preheating Ls Preheating Length Temp. Length Temp. Preheating Max. Dwelling Time Time Wave (t1) Soldering (t2) Temp. Recommend Hand-Soldering Max. Wave Soldering Temp. Preheating Temp. Dwelling Time Cooling Time Lead Wire Forming 1. If lead wire has to be bent, please pay attention to the distance between body and bending point. Refer to Table X-3. ATCO Body 2. When bending leads, please use pincher or similar tools to fix Lb the product as shown in Fig.X-2, to...

Open the catalog to page 12

All Xiamen SET electronics Co. catalogs and technical brochures

  1. SC625 series

    8 Pages

  2. SMF Series

    11 Pages

  3. F Series

    12 Pages