Thermal-Link (ATCO)-Aiioy Type Description Thermal-Link (ATCO)-Alloy Type is defined as a non-resettable protective device functioning one time only. It is widely used in electrical equipment. ATCO is mainly consist of fusible alloy, flux resin, case, sealant and lead wires. Normally, fusible alloy is jointed to the two lead wires. Under abnormal conditions, when the temp. reaches to the fusing temp. of ATCO, the fusible alloy melts and quickly retracts to the two lead wire ends with the aid of the flux resin and disconnects the circuit completely. SETsafe | SETfuse Thermal-Link (ATCO)-Alloy Type SKL series Rated Functioning Temp. from 200 °C to 230 °C, Rated Current: 10A, safety certification Includes TUV, CCC, and complies with RoHS and REACH. • Other Temp. • The Length of Lead Wires • Lead Wires can Make Pluggable Terminals Features • Make a Mounting Hole • Lead Wires Insulated • High Accuracy of Functioning Temp. • RoHS & REACH Compliant Applications • Electric Heating Appliances • Home Electrical Appliances RoHS & REACH Agency Mark Rated Voltage Structure Diagrams Radial Fusible Alloy Flux Resin Sealant Epoxy Marking Radial (Color for reference only) Trademark Date Code Rated Functioning Temp. Rated Current •-Lead Wire Remark: The Date Code means Year and quarter: A stands for 2000, B stands for 2001 and 01 stands for the first quarter, 02 stands for the second quarter, and so on. +86-592-571-5838 www.SETfuse.comwww.SETsafe.com E-mail : [email protected] All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2024-2026 V1.1

Thermal-Link (ATCO)-Aiioy TypeSpecifications •a 1: "•"Means certificated, "0"Means non-certificated. 2: RoHS & REACH Compliant . 3: “ a “: The temperature measurement point for holding temperature (Th) shall be positioned 50 mm away from the product body, in accordance with the requirements specified in Appendix I of GB/T 9816.1-2023. E-mail : [email protected] All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2024-2026 V1.1

Thermal-Link (ATCO)-Aiioy TypeAgency Information Agency Symbol 1. Soldering should be carried out according to Table T-1. 2. The thermal element of ATCO is fusible alloy with low melting point, which is jointed with ATCO lead wires. Improper soldering operation (too high soldering temp. , too long soldering time, too short lead wire etc.) may transfer more heat to the thermal element and ATCO may open in advance. 3. When soldering conditions are more severe than those listed in Table T-1, a heat sink fixture should be used between soldering point and ATCO body. 4. When soldering, please do not...

Thermal-Link (ATCO)-Aiioy Type Wave Soldering The wave soldering parameters as Table T-2, for reference only, when ATCO is for practice use, you need to do some validation experiments. For example, using X-RAY to see the fusible alloy of ATCO whether damage after wave soldering. TABLE T-2 Wave Soldering Parameters Setting Max. Wave Soldering Temp. Preheating Temp. Preheating Time Dwelling Time Cooling Time E-mail : [email protected] All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2024-2026 V1.1

Thermal-Link (ATCO)-Alloy Type Product Temp.-Time Curve (Reference) The Temp.-Time Curve of Thermal-Link in different temp. oil bath. Product Current-Time Curve (Reference) The Current-Time Curve shows functioning time at multi-times rated current at room temperature 25 ± 2 °C. E-mail : [email protected] All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2024-2026 V1.1 5

Thermal-Link (ATCO)-Aiioy TypePackaging InformationBulk Item +86-592-571-5838 www.SETfuse.comwww.SETsafe.com E-mail : [email protected] All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2024-2026 V1.1

- M T W A B - 001 Other Options Packing B Bulk T Taping Leads Forming A Straight Lead B Single Lead Bending E Leads Bending and Kinking Color of Insulation Tube W White Y Yellow R Red Insulation Tube Material T Teflon Lead Wire Type M Multi stranded tinned copper wire Rated Functioning Temp. Series Series Product Category ATCO Alloy Thermal-Link +86-592-571-5838 www.SETfuse.comwww.SETsafe.com E-mail : [email protected] All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2024-2026 V1.1

Thermal-Link (ATCO)-Aiioy TypeGlossary Item +86-592-571-5838 www.SETfuse.comwww.SETsafe.com E-mail : [email protected] All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2024-2026 V1.1

Thermal-Link (ATCO)-Aiioy Type 1. When atmosphere pressure is from 80 kPa to 106 kPa, the related altitude shall be from 2000 meters to - 500 meters. 2. Operating voltage less than rated voltage of ATCO, operating current less than rated current of ATCO. 3. Do not touch the ATCO body or lead wires directly when power is on, to avoid burn or electric shock. ATCO is a non-repairable product. For safety sake, it shall be replaced by an equivalent ATCO from the same manufacturer, and mounted in the same way. Do not store the ATCO at the high temp., high humidity or corrosive gas environment, avoid...

Thermal-Link (ATCO)-Aiioy TypeMechanical ConnectionRiveting 1. Choose small resistivity riveting material and be riveted. 2. A flexible lead or lead with low resistance should be used to rivet the ATCO. 3. Contact resistance should be minimal, large contact resistance will lead to higher temp., ATCO Functioning in advance. 1. Choose small resistivity crimping material and be crimped. 2. A flexible lead or lead with low resistance should be used to rivet the ATCO. 3. Contact resistance should be minimal, large contact resistance will lead to higher Temp., ATCO Functioning in advance. 1. If lead...

Axial Shape Radial Shape Radial Shape (Screw Hole) Do ( l)mduiei Buiuopounj pejey - £ +86-592-571-5838 www.SETfuse.comwww.SETsafe.com E-mail : [email protected] All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2024-2026 V1.1

Thermal-Link (ATCO)-Alloy Type Feature & Model List Overview +86-592-571-5838 www.SETfuse.comwww.SETsafe.com E-mail : [email protected] All Rights Reserved by Xiamen SET Electronics Co., Ltd. 2024-2026 V1.1