Conventional panel mounting type KS53 Solid State Relay Mini size and Single channel control type Max AC load 25A Round screw terminal and fasten terminal is optional Transparent finger-proof cover is available,compliant with IP20 standard

Panel Mount – AC Output Application Scenarios： Mainly used in equipment such as rubber and plastics, commercial kitchen appliances, instant hot water dispensers, and coffee machines. ■ DESCRIPTION KS53 is an AC output panel mount type SSR. It offers 4~32VDC input voltage option and two AC output voltage options 240VAC and 380VAC as well as two output current ratings 10A, and 25A for selection. The SSR provides photoelectric isolation between input and output with dielectric strength 4000V . KS53 has the built-in RC snubber circuit and is epoxy resin encapsulated. Built-in RC snubber circuit TRIAC...

■ SELECTION GUIDE (Ta=25℃) Control voltage range Must turn-on voltage Must turn-off voltage Max. reverse protection voltage Load current range (A) Load voltage range Max. off-state leakage current Max. on-state voltage drop Max. turn-on time(Zero-cross type) ■ GENERAL SPECIFICATIONS (Ta=25℃) 2500VAC, 50~60Hz, 1min, input/output/base Insulation resistance Operating temperature Storage temperature Unit weight ■ PRECAUTIONS 1. Please pay special attention to the actual load current and the ambient temperature when doing the type selection. And the SSR requires proper heat sinking for heat dissipation...

Panel Mount – AC Output ■ PRECAUTIONS 3. Tighten the SSR screw terminals properly. If the screws are loose, the SSR would be damaged by heat generated from connection. Also excessive screw mounting torque may damage the SSR’s internal components. The recommended mounting torque range for M3 screw is 0.58~0.98N·m. 4. Please do not use the SSR exceeding the limitation which is specified on this datasheet. ■ OUTLINE DIMENSIONS, WIRING DIAGRAMOUTLINE Outline Dimensions Quick connection type screw type Wiring Diagram Mounting Holes Control Signal Max. Load Current vs. Ambient Temperature (10A) Max....