METALLIZED CERAMICS INSULATOR|Innovacera
1 / 3Pages

METALLIZED CERAMICS Introductions Specializing in Metallized Ceramic Components used in various industrial, based materials as below; 94%,96%,99%,99.6% Alumina Ceramic Components; AlN Ceramic Substrate; BeO Ceramic Substrate; Metallized Ceramics Metallizing on alumina ceramic components surface is a very important technique for brazing with metal parts. Mo/Mn and W paste developed by Innovacera is used for the metallization. Feed-through insulators High-power receptacles Insulating discs Insulating rings and cylinders Precipitator products Available Ceramic Composition Power Switches Vacuum Interrupters 94%,96%,99%,99.6% Alumina Ceramic Components; X-Ray tubes Our processing is available in a wide range of size and shapes as customer request.

Material Specification and Properties Surface Roughness Water Absorption Average Crystalline Size Elastic Modulus Poisson’s Ratio Compressive Strength Fracture Toughness NOCHED BEAM Thermal Conductivity (20°C) Coefficient of Thermal Expansion(20~1000°C) Specific Heat Thermal Shock Resistance Dielectric Strength Dielectric Constance (1MHz.25°C) Electrical Bulk Density Alumina Content Dielectric Loss (tan delta, 1MHz.25°C) The general characteristics of this material described aboved were derived from laboratory test performed by Innovacera from time on sample quantities. Actual...

厦门英诺华新材料有限公司 XIAMEN INNOVACERA ADVANCED MATERIALS CO.,LTD UNIT 4G, WEST SIDE LIANCHANG BLDG, NO.6-8 HULI AVE, HULI DIST, XIAMEN, FUJIAN, CHINA 361004 TEL: 0086 592 558 9730 EMAIL: SALES@INNOVACERA.COM WWW.INNOVACERA.COM