MINIATURE HIGH POWER RELAY Features ● ● ● ● ● Small volume and low height 1 Form A and 1 Form C configurations Surge Resistance Satisfies TV-5 UL insulation system: Class F available Outline dimensions：(15.6×12.4×13.6) mm RoHS compliant CONTACT DATA Contact arrangement Coil power Contact resistance Contact material Contact rating Max.swtiching voltage Max.switching current Mechanical endurance Electrical endurance Notes:The data shown above are initial values. Notes:1)The coil holding voltage is the voltage applied to coil 100ms after the rated voltage. COIL DATA Nominal Pick-up Drop-out Max. Voltage Voltage Voltage Coil Voltage2) VDC VDC(1) VDC VDC Notes:1) The data shown above are initial values. 2) Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. SAFETY APPROVAL RATINGS CHARACTERISTICS Insulation resistance Dielectric Between coil & contacts strength Between open contacts Operate time(at rated voltage) Release time(at rated voltage) Functional Shock resistance Destructive Vibration resistance 5A 250/125VAC Room temp. 5A 28VDC Room temp. 5A 277/250/125VAC Room temp. 10A 28VDC Room temp. 5A 277/250/125VAC Room temp. 5A 28VDC Room temp. 5A 250/125VAC Room temp. 10A 28VDC Room temp. Unit weight Flux proofed Ambient temperature Notes:The data shown above are initial values. Notes: The typical loads listed above are only part of the product certification. The detailed test conditions of each load are different,so the electrical durability is different. For more information, please contact us. HONGFA RELAY

ORDERING INFORMATION Type Coil voltage Contact arrangement H: 1 Form A Z: 1 Form C Construction Contact material Insulation class Special code XXX: Customer special requiremen；Nil: Standard OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions Wiring Diagram (Bottom view) (Bottom view) Notes: 1) The pin dimension of the product outline drawing is the size before tinning (it will become larger after tinning), and the mounting hole size is the recommended design size of the PCB board hole. The specific PCB board hole design size can be mapped and adjusted according to the actual...

CHARACTERISTIC CURVES MAX.SWITCHING POWER ENDURANCE CURVE COIL TEMPERATURE RISE 70 Contact Current (A) A:NO,250VAC,Resistive load,Room temp.,1s on 9s off B:NO,28VDC,Resistive load,Room temp.,1s on 9s off C:NO,12VDC,Resistive load,Room temp.,1s on 9s off Percentage Of Nominal Coil Voltage Test conditions:85℃ 10A Mounting distance:10mm Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the...