*mydirectindustry

Catalogs
Xiamen Four-Faith Communication Technology Co.,Ltd
zigbee module F8913

zigbee module F8913

Product catalog summary

Product Overview
The F8913 ZigBee module is a data terminal device designed for data transfer via ZigBee networks. It features a high-performance industrial-grade ZigBee solution, supports transparent data transmission, and is designed for low power consumption with a working current of less than 1uA. It includes 5 I/O channels, 5 pulse wave output channels, 3 analog inputs, and 2 pulse input counters. The module is applicable in various M2M fields such as intelligent transportation, smart grid, and industrial automation.

Design for Industrial Application
The module is equipped with a high-powered industrial ZigBee chip and supports low power consumption with multi-sleep and trigger modes. It offers UART and optional SPI interfaces and operates within a power range of DC 2.0~3.6V.

Stability and Reliability
Features include hardware and software watchdog timers (WDT) and an auto-recovery mechanism to ensure constant online status.

High-performance Features
The module supports ZigBee wireless data transmission, repeater and end-device functions, and various network topologies including Point-to-Point, Point-to-Multipoint, Peer-to-Peer, and Mesh networks. It can support up to 65,000 nodes and offers a wide communication range.

Product Specifications

Model Variants: F8913-N-MS, F8913-E-MS, F8913-N-NS, F8913-E-NS, with options for PA and SMT/DIP configurations.
ZigBee Specification: Operates on IEEE 802.15.4 protocol, ISM 2.4~2.5GHz band, with indoor range up to 90m and outdoor range up to 2000m with PA.
Transmit Power: Up to 100 mw (+20dBm) with PA.
RF Data Rate: 250Kbps.
Receiver Sensitivity: -97dBm, -103dBm with PA.
Interface Type: UART with various baud rates and checksum options.
Antenna: U.FL RF connector with 50 ohm impedance.

Power Consumption
Detailed power consumption metrics are provided for different modes (Idle, RX, TX) across various models and configurations, with deep sleep consumption as low as 0.3 uA.

Physical Characteristics
Dimensions are 37.5 x 22.1 x 2.8 mm, and the weight is 3.5 g.

Environmental Limits
Operating temperature ranges from -40 to +85ºC, with storage temperatures up to +125ºC and operating humidity at 95% (non-freezing).

Catalog excerpts

F8913 ZigBee Module Technical Specification F8913 ZigBee Module TECHNICAL SPECIFICATION ZigBee Module ZigBee Module ZigBee Module ZigBee Module F8913 ZigBee module is a kind of data terminal device that provides data transfer function by ZigBee network. The product uses high-performance industrial-grade ZigBee solution, support transparent data transmission function; low power consumption design, the lowest working current can less than luA; supply 5 I/O channels, compatible 5 pulse wave output channels, 3 analog inputs and 2 pulse input It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on. Design for Industrial Application ♦ High-powered industrial ZigBee chip ♦ Low power consumption design, support multi-sleep and trigger modes to reduce the power dissipation ♦ Support UART and optional SPI interface ♦ Support hardware and software WDT ♦ Support auto recovery mechanism, including online detect, auto redial when offline to make it always ♦ Support ZigBee wireless data transmission ♦ Support repeater and end-device function ♦ Support Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh network ♦ Support center node, route node and terminal node ♦ Support broadcast and target address transfer ♦ Wide communication range ♦ Supply 5 I/O channels, compatible 5 pulse wave output channels, 3 analog inputs and 2 pulse input Xiamen Four-Faith CommunicationTechnology Co., Ltd.

Open the catalog to page 1

I I F8913 ZigBee Module Technical Specification ♦ Adopt a miniature package, support 2.0mm spacing stamp hole for SMT and 2.0mm spacing through-hole pins simultaneous ♦ Support intellectual mode, enter into communication state automatically when powered, support several work modes. ♦ Convenient configuration and maintenance interface ♦ Support for serial software upgrades and remote Product Specification Xiamen Four-Faith CommunicationTechnology Co., Ltd.

Open the catalog to page 2

I I F8913 ZigBee Module Technical Specification Xiamen Four-Faith CommunicationTechnology Co., Ltd.

Open the catalog to page 3

I I F8913 ZigBee Module Technical Specification Xiamen Four-Faith CommunicationTechnology Co., Ltd.

Open the catalog to page 4

All Xiamen Four-Faith Communication Technology Co.,Ltd catalogs and technical brochures

Archived catalogs

F-R100 4G Industrial Cellular Router with Din Rail
3 Pages
F-R100 Industrial Router
3 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list