Catalogs >
Xiamen Four-Faith Communication Technology Co.,Ltd >
F8914 ZigBee Terminal

F8914 ZigBee Terminal
4Pages

Catalog excerpts

F8914 ZigBee Terminal Specification F8914 ZigBee TERMINAL TECHNICAL SPECIFICATION F8914 ZigBee Terminal is a kind of data cellular terminal device that provides data transfer function by ZigBee network. It adopts high-powered industrial ZigBee solution and embedded real time operating system. It supports RS232 and RS485 (or RS422) port that can conveniently and transparently connect one device to a ZigBee network, allowing you to connect to your existing serial devices with only basic configuration .It has low power consumption states in which the power consumption 2.2mA@12VDC. It has compatible digital 5 I/O channel, ADC, input pulse counter and pulse wave output function. It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on. ZigBee Terminal ZigBee Terminal Design for Industrial Application High-powered industrial ZigBee processing chip Low power consumption design, support multi-sleep and trigger modes to reduce the power dissipation farthest Housing: iron, providing IP30 protection ♦ Support hardware and software WDT ♦ Power port: reverse-voltage and overvoltage ♦ Antenna port: lightning protection(optional) ♦ Adopt terminal block interface, convenient for industrial application ♦ Support standard RS232/RS485 ports that can connect to serial devices directly ♦ TTL logic level RS232 interface can be customized ♦ Support intellectual mode, enter into communication state automatically when powered ♦ Support several work modes ♦ Convenient configuration and maintenance interface Xiamen Four-Faith CommunicationTechnology Co., Ltd.

Open the catalog to page 1

I I F8914 ZigBee Terminal Specification ♦ Support ZigBee wireless short-distance data ♦ Support repeater and terminal device function ♦ Support Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh network ♦ Support center node, route node and terminal node ♦ Support broadcast and target address transfer ♦ Support wide communication range ♦ Supply 5 I/O channels, compatible 2 pulse wave output channels, 3 analog inputs and 2 pulse input Product Specification ZigBee Specification Xiamen Four-Faith CommunicationTechnology Co., Ltd.

Open the catalog to page 2

F8914 ZigBee Terminal Specification Interface Type 1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection Checksum: none,odd,even Standard SMA female interface, 50 ohm, lighting protection(optional) Terminal block interface, reverse-voltage and overvoltage protection Antenna Interface Power Input Xiamen Four-Faith CommunicationTechnology Co., Ltd.

Open the catalog to page 3