*mydirectindustry

Catalogs
Xiamen Four-Faith Communication Technology Co.,Ltd
F8913 ZigBee module,ZigBee radio module

F8913 ZigBee module,ZigBee radio module

Product catalog summary

Product Features
The F8913 ZigBee module is a data terminal device designed for data transfer via ZigBee networks. It features a high-performance industrial-grade ZigBee solution, supports transparent data transmission, and is designed for low power consumption with a working current of less than 2mA. It offers 5 I/O channels, 5 pulse wave output channels, 3 analog inputs, and 2 pulse input counters. The module is applicable in various M2M fields such as intelligent transportation, smart grid, and industrial automation.

Design for Industrial Application
The module includes a high-powered industrial ZigBee chip, supports low power consumption with multi-sleep and trigger modes, and offers UART and optional SPI interfaces. It operates within a power range of DC 2.0~3.6V.

Stability and Reliability
It supports hardware and software watchdog timers (WDT) and an auto-recovery mechanism to ensure constant online status.

High-performance
The module supports ZigBee wireless data transmission, various network topologies including mesh networks, and can accommodate up to 65,000 nodes. It also supports broadcast and target address transfer.

Product Specification
The F8913 model is available in four variations based on PA presence and mounting type (SMT or DIP). It operates on the IEEE 802.15.4 protocol within the ISM 2.4~2.5GHz band, with indoor ranges up to 90m and outdoor ranges up to 2000m with PA. The RF data rate is 250Kbps, and it supports channels 11 to 26.

Interface Type
The module supports UART with various baud rates and checksum options. It includes a U.FL RF connector with 50-ohm impedance.

Power Input
Recommended power is DC 3.3V/0.1A, with a range of DC 2.0~3.6V. Power consumption varies by model and mode, with deep sleep consumption as low as 0.4uA.

Physical Characteristics
The module measures 37.5 x 22.1 x 2.8 mm and weighs 3.5 g.

Environmental Limits
It operates within temperatures of -40~+85ºC and can be stored at -40~+125ºC, with an operating humidity of 95% (non-freezing).

Catalog excerpts

F8913 ZigBee module,ZigBee radio module-1

F8913 ZigBee Module Technical Specification File version F8913 ZigBee Module TECHNICAL SPECIFICATION General F8913 ZigBee module is a kind of data terminal device that provides data transfer function by ZigBee network. The product uses high-performance industrial-grade ZigBee solution, support transparent data transmission function; low power consumption design, the lowest working current can less than 2mA; supply 5 I/O channels, compatible 5 pulse wave output channels, 3 analog inputs and 2 pulse input counters. It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on. Product Feature --------------------------------------------------------------------------------------------------------------------------------------Design for Industrial Application High-powered industrial ZigBee chip Low power consumption design, support multi-sleep and trigger modes to reduce the power dissipation farthest Support UART and optional SPI interface Power range: DC 2.0~3.6V Stability and Reliability Support hardware and software WDT Support auto recovery mechanism, including online detect, auto redial when offline to make it always online High-performance Support ZigBee wireless data transmission Support repeater and end-device function Support Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh network Support 65000 nodes Support center node, route node and terminal node Support broadcast and target address transfer Wide communication range Supply 5 I/O channels, compatible 5 pulse wave output channels, 3 analog inputs and 2 pulse input counters.

Open the catalog to page 1

F8913 ZigBee module,ZigBee radio module-2

F8913 ZigBee Module Technical Specification Standard and Convenience Adopt a miniature package, support 2.0mm spacing stamp hole for SMT and 2.0mm spacing through-hole pins simultaneous Support intellectual mode, enter into communication state automatically when powered, support several work modes. Convenient configuration and maintenance interface Support for serial software upgrades and remote maintenance Product Specification----------------------------------------------------------------------------------------------------------------Specification---F8913 Model Sheet Model Without PASMT With...

Open the catalog to page 2

F8913 ZigBee module,ZigBee radio module-3

F8913 ZigBee Module Technical Specification Support 2.0mm spacing stamp hole for SMT and 2.0mm spacing through-hole pins simultaneous Power Input Recommended Power Power Range Power Consumption Working States Power Consumption Idle Mode Idle Mode Idle Mode Router Timing wake up Deep Sleep Idle Mode RX Mode Idle Mode Idle Mode Coordinator Timing wake up Deep Sleep Idle Mode

Open the catalog to page 3

F8913 ZigBee module,ZigBee radio module-4

F8913 ZigBee Module Technical Specification Idle Mode Timing wake up Deep Sleep Idle Mode RX Mode Idle Mode Idle Mode Coordinator Deep Sleep Physical Characteristics Item Dimensions Weight Environmental Limits Item Operating Temperature Storage Temperature Operating Humidity

Open the catalog to page 4

All Xiamen Four-Faith Communication Technology Co.,Ltd catalogs and technical brochures

Archived catalogs

F-R100 4G Industrial Cellular Router with Din Rail
3 Pages
F-R100 Industrial Router
3 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list