F8114 ZigBee+GPRS IP MODEM Specification File version F8114 ZigBee+GPRS IP MODEM TECHNICAL SPECIFICATION General F8114 ZigBee+GPRS IP MODEM is a kind of data terminal device that provides data transfer function by public GPRS and ZigBee network. It adopts high-powered industrial 32 bits CPU and embedded real time operating system. It supports RS232, RS485 (or RS422) and ZigBee port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial and ZigBee devices with only basic configuration. It has low power consumption states in which the power consumption could be 1ower than 1mA@12VDC. It has compatible digital I/O channel, ADC, input pulse counter and pulse wave output function. It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on. Product Feature --------------------------------------------------------------------------------------------------------------------------------Design for Industrial Application High-powered industrial cellular module High-powered industrial ZigBee module High-powered industrial 32 bits CPU Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function Housing: iron, providing IP30 protection Power range: DC 5~35V Stability and Reliability Support hardware and software WDT Support auto recovery mechanism, including online detect, auto redial when offline to make it always online RS232/RS485/RS422 ports:15KV ESD protection SIM/UIM port: 15KV ESD protection Power port: reverse-voltage and overvoltage protection Antenna port: lightning protection(optional) Standard and Convenience Adopt terminal block interface, convenient for industrial application Support standard RS232, RS485(or RS422) and ZigBee port that can connect to serial and ZigBee devices directly

F8114 ZigBee+GPRS IP MODEM Specification Support double data centers, one main and another backup Supply 5 I/O channels, compatible 2 pulse wave output channels, 2 analog inputs and one pulse input counters. Support multi data centers and it can support 5 data centers at the same time Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout Support dynamic domain name(DDNS) and IP access to data center Design with standard TCP/IP protocol stack Support APN/VPDN TTL logic level RS232 interface can be customized Support intellectual mode, enter into...

F8114 ZigBee+GPRS IP MODEM Specification Receiver Sensitivity Network Topologies Number of channels Channels Max packge size -95dBm -104dBm(for enhanced version) Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh 16 Direct Sequence Channels 15 Direct Sequence Channels (for enhanced version) 11 to 26 11 to 25 (for enhanced version) 1024 Bytes Hardware System Item CPU Content Industrial 32 bits CPU Interface Type Item Serial Content 1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5, 2 Parity: none, even, odd, space, mark Baud rate: 110~230400...

F8114 ZigBee+GPRS IP MODEM Specification Power Consumption Working States Sleep Timing Power Off Physical Characteristics Item Housing Dimensions Weight Content Iron, providing IP30 protection 91x58.5x22 mm 210g Environmental Limits Item -25~+65ºC (-13~+149 Extended Operating Temperature Storage Temperature Operating Humidity