Catalogs >
Xiamen Four-Faith Communication Technology Co.,Ltd >
F2164 GPRS RTU,Industrial Wireless RTU

F2164 GPRS RTU,Industrial Wireless RTU
4Pages

Catalog excerpts

F2164 GPRS RTU,Industrial Wireless RTU - 1

F2164 GPRS RTU Technical Specification F2164 GPRS RTU Technical SPECIFICATION F2x64 GPRS RTU is wireless remote terminal unit(abbreviation:RTU). RTU has many functions (analog input > switch input > switch output pulse counting and wireless data communication ect). It adopts high-powered industrial 32 bits CPU and embedded real time operating system. It supports RS232 and RS485 (or RS422) port that can conveniently and transparently connect one device to a cellular network. allowing you to connect to your existing serial devices with only basic configuration. It has low power consumption states in which the power consumption could be lower than lmA@12VDC. It has compatible digital I/O channel, ADC, input pulse counter and pulse wave output function. It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on. Produc Feature Design for Industrial Application ♦ High-powered industrial cellular module ♦ High-powered industrial 32 bits CPU ♦ Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest ♦ Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function ♦ Housing: iron, providing IP30 protection. ♦ Support hardware and software WDT ♦ Support auto recovery mechanism, including online detect, auto redial when offline to make it always online ♦ SIM/UIM port: 15KV ESD protection ♦ Power port: reverse-voltage and overvoltage ♦ Antenna port: lightning protection(optional) ♦ Adopt terminal block interface, convenient for industrial application port that can connect to serial devices directly ♦ TTL logic level RS232 interface can be Xiamen Four-Faith CommunicationTechnology Co., Ltd.

Open the catalog to page 1

F2164 GPRS RTU,Industrial Wireless RTU - 2

I I F2164 GPRS RTU Technical Specification ♦ Support intellectual mode, enter into communication state automatically when powered ♦ Provide management software for remote ♦ Support several work modes ♦ Convenient configuration and maintenance ♦ 8 ch acquisition analog input (resolution: 16bit) Input voltage (0-5V) ,Input current (0-20mA) , ♦ 4 ch optocoupler isolation output,open collector to Contains all the way count function (lKHz) ♦ Support double data centers, one main and another ♦ Support multi data centers and it can support 5 data centers at the same time ♦ Support multi-center...

Open the catalog to page 2

F2164 GPRS RTU,Industrial Wireless RTU - 3

I I F2164 GPRS RTU Technical Specification ♦ When alarm information are reported through SMS, alarm number and alarm content of each ♦ The remote upgrading parameters can be set by SMS. RTU are remodely upgrading, when SMS set remote upgrading parameters successfully. ♦ SMS remotely config parameters ♦ Built-in industrial clock, the acquisition time can be recorded through this clock ♦ Network is automatically conneted, when device power on. Network is automatically reconnected, when network is not conneted successfully. ♦ The function of regular boot and shutdown make the device work in...

Open the catalog to page 3