User’s Manual of Digital Gaussmeter Model DX-150 Brand: DEXINMAG Dexing Magnet Tech. Co.,Ltd. Add: Unit 409, 4/F, No.992, Anling Road, Huli District, Xiamen, China E-Mail: [email protected] H Visit Our Website: www.dexinmag.com H Fax: 0086-592-5237901 Telephone: 086-592-5237772 / 5558386 Methods and apparatus disclosed and described herein have been developed solely on company funds of Dexing Magnet Tech. Co., Ltd.. No government or other contractual support or relationship whatsoever has existed which in any way affects or mitigates proprietary rights of Dexing Magnet Tech. Co., Ltd.. in these developments. Dexing Magnet Tech. Co., Ltd.. reserves the right to add, improve, modify, or withdraw functions, design modifications, or products at any time without notice. Dexing Magnet Tech. Co., Ltd.. shall not be liable for errors contained herein or for incidental or consequential damages in connection with furnishing, performance, or use of this material

LIMITED WARRANTY STATEMENT DX warrants that this DX product (the “Product”) will be free from defects in materials and workmanship for the Warranty Period specified as 12 months from the date of delivery of the Product. If DX receives notice of any such defects during the Warranty Period and the Product is shipped freight prepaid, DX will, at its option, either repair or replace the Product if it is so defective without charge to the owner for parts, service labor or associated customary return shipping cost. Replacement or repaired parts will be warranted for only the unexpired portion of the...

6.3 Dexing Magnet Tech. Co., Ltd..Gauss Meter Professional mapping software .. 33

1.0 GENERAL This chapter provides an introduction to the DX Model 150 Gauss/Tesla meter. The Model DX-150 was designed and manufactured in BeiJing of China by Dexing Magnet Tech. Co., Ltd.. The Model DX-150 is a highly accurate intellectualized gaussmeter well suited for field work. It features: Resolution to 4¾ Digits wide liquid crystal display accuracy of direct current measurement: reading × ±0.30% A maximum / minimum value / Hold screen Automatic Probe zero-check, RS232 Serial Interface Display unit can be gauss or tesla Zero setting, threshold settings and alarm Auto-zero, automatic, manual...

Figure 1-1 DX-150Glass/Tesls meter Front Panel 1.1 PRODUCT DESCRIPTION The Fully Digital Model DX-150 Gauss/Tesla meter is well suited to meet these requirements with high accuracy and high resolution in the magnet testing application. It is higher precision artificial Intelligence Instruments designed and manufactured by DX , it is an artificial Intelligence solution aimed at the traditional pointer Gauss/Tesla mete, digital meter Instruments. DX-150 makes full use of microprocessor technology, and provides you high precision, higher refresh rate and display resolution, and higher measuring...

configurations. The RS-232C Serial Interface can perform nearly every function of the instrument front panel. Two analog voltages and an alarm relay facilitate automation without a computer. Conformity The DX-150 has strong stability and conformity. The conformity can reach 0.1% (stable magnetic field). Probe The DX-150 is delivered with DX all serial one-dimensional transverse and Axial probe. probes are factory calibrated for accuracy and interchangeability. Calibration data is loaded into a PROM located in the probe connector so that it does not have to be entered by the user. 1.2.1 General...

Connector: 9 pin D style(DB), DCE configuration(direct connected to PC) Display Type: 128 * 64 monochrome LCD Display Units: Gauss (G), Tesla (T) Keypad: 10 key membrane Front Panel Features: Intuitive operation, display prompts Figure 1-2 line 3,4 displays the peak Readings RS-232C Capabilities: Baud: 19200, 57600, 115200 Connector: 9 pin D style(DB), DCE configuration(direct connected to PC) 1.2.6 General Ambient Temperature: 15 – 35 °C at rated accuracy. 0 °C – 40 °C with reduced accuracy. Power Requirement: 220 VAC (+5%, -10%), 50 or 60 Hz, 20 watts Size: 320mm W × 110 mm H × 287 mm D, half...

the Model DX-150 Gauss/Tesla meter regular digital slim transverse hall probe 220VAC power wire * calibration certification model DX-150 Gauss/Tesla Meter User’s Manual one 9 pin RS232 direct Communication Cable RS232 TO USB 2.0 interface transfer one zero-Gauss Chamber one Gauss Professional Drawing software one probe Bracket one 1.3 SAFETY SUMMARY Observe the following general safety precautions during all phases of operation, service, and repair of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design,...

wire (green) firmly connected to a ground (safety ground) at the power outlet. The power jack and mating plug of the power cable meet safety standards of the state. Do Not Operate In An Explosive Atmosphere Do not operate the instrument in the presence of flammable gases or fumes. It is a safety hazard. Keep Away From Live Circuits Inside the Instrument Operating personnel must not remove instrument covers. Refer component replacement and internal adjustments to qualified maintenance personnel. Do not replace components with power cable connected. To avoid injuries, always disconnect power and...

2.0 GENERAL This chapter provides general installation instructions for the Model 150 Gauss/Tesla meter. Inspection and unpacking instructions are provided in Paragraph 2.1. Repackaging for shipment instructions are provided in Paragraph 2.2. An definition of rear panel controls is provided in Paragraph 2.3-2.6. Finally, an initial setup and system checkout procedure is provided in Paragraph 2.7. 2.1 INSPECTION AND UNPACKING Inspect shipping containers for external damage, and damage (apparent or concealed) or partial loss of shipment. If damage or loss is apparent, please notify the shipping...

2.3 REAR PANEL DEFINITION This paragraph provides a description of the Model 150 rear panel connections. The rear panel consists of : 1) the line input assembly, safe subassembly, 2) Serial I/O Connector, 3)Probe Input Connector. Please read paragraph2.3-2.6 then proceed to Paragraph 2.7 for the initial setup and system checkout procedure. Rear panel connector pin-out details are provided in Chapter 6 – Service. CAUTION: Verify AC Line Voltage shown in the fuse holder window is appropriate for the intended AC power input. Also remove and verify the proper fuse is installed before plugging in...