Digital density meter JL-T

Digital density meter JL-T

Digital density meter JL-T

Product catalog summary
Principle: The electronic density meter models JL3002GT and JL6002GT operate using the water displacement method, adhering to various international standards such as GB/T533, ISO2781, and ASTM standards.
Purpose: These devices are primarily used in industries like pawn shops, precious metal recycling, and jewelry for determining the purity of precious metals.
Specifications: The manual details three models with capacities of 300g and 600g, weighing accuracy of 0.01g or 0.005g, and density accuracy ranging from 0.001g/cm³ to 0.0001g/cm³.
Installation: Instructions include leveling the host, adding distilled water, and ensuring proper placement of the measuring platform. A note emphasizes careful handling to avoid damaging the sensor.
Calibration: Calibration is necessary under specific conditions such as first-time use or environmental changes. The manual describes both one-point and four-point calibration processes.
Temperature and Solution Compensation: The device compensates for temperature variations in water, with settings available for different liquid media.
Operating Steps: Detailed procedures are provided for measuring solid, floating, and particle samples, including the use of an anti-floating rack and specific steps for each sample type.
Maintenance: Recommendations include avoiding overloading, keeping the device clean, and removing the water tank if not in use for extended periods.
Troubleshooting: Solutions for common issues like weight instability and zeroing errors are provided, with advice to contact the supplier for unresolved problems.
See more

Catalog excerpts

Digital density meter JL-T-1

Xi’an Yunyi Instrument Co.,Ltd Mob /WhatsApp:+86-17391853601 Email: [email protected] http://www.yunyiinstrument.com Electronic Density Meter manual Add: Room 11003, 10th Floor, Sihai Center, No. 424, Taihua North Road, Weiyang District, Xi'an 710021, Shaanxi,China

 Open the catalog to page 1
Digital density meter JL-T-2

I. Principle: The direct reading gold detector JL3002GT/JL6002GT is based on GB/T533, ISO2781, astmd297-93, DIN 53479, ASTMD792, D618,D891, ISO1183, GB/T1033, ASTM d792-00, JISK6530, ASTM d7992-00, and JISK6530, using the water displacement method of the alkimide. II. Purpose: This machine is mainly used in pawn shop, precious metal recycling, jewelry silver building... And other industries. Accord with GB/T1423 precious metal purity determination method. HI. Instruction Add: Room 11003, 10th Floor, Sihai Center, No. 424, Taihua North Road, Weiyang District, Xi'an 710021, Shaanxi,China

 Open the catalog to page 2
Digital density meter JL-T-3

Xi'an Yunyi Instrument Co.,Ltd Mob /WhatsApp:+86-17391853601 Email: [email protected] http://www.yunyiinstrument.com N: Installation 1. Adjust the 4 pins to determine the level of the host, and determine that the sensor platform and the water container support base are not in contact. 2. Add distilled water (product that has not been tested) and put it on the support seat of the water container. 3. The measuring platform is placed on the sensor platform and the bottom of the measuring platform is placed correctly on the sensor platform, and the measuring column is lowered into the water. When...

 Open the catalog to page 3
Digital density meter JL-T-4

Xi'an Yunyi Instrument Co.,Ltd Mob /WhatsApp:+86-17391853601 Email: [email protected] http://www.yunyiinstrument.com 2:Turn off the machine. 3: Press “^0^” key while turn on the machine, after show “CAL” remove “Zero” key. 4:Now show “300.000” flashing, put on 300g weight on the pan ,after show “300.00” remove the weight, now show “200.00”, put on the right weight on the pan until show “0.000”, finish calibration. ^Temperature and solution compensation setting The apparent density of the sample to water can be measured by the tester when the water equivalent solution is used. The apparent...

 Open the catalog to page 4
Digital density meter JL-T-5

Xi’an Yunyi Instrument Co.,Ltd Mob /WhatsApp:+86-17391853601 Email: [email protected] http://www.yunyiinstrument.com the sample is less than 1.000 g / ㎤ density, then the samples will be under the anti-floating frame shows a negative value for floating body and weight. 3. Press “Memory”to calculate the density value. Particle sample Preparation: 1. Change the liquid medium to alcohol (refer to temperature and solution compensation setting), for example, the surface tension of ethanol is low. 2. Set the density value of liquid media. 3. Prepare 1 measuring cup and 1 tea ball. Steps: 1. Put...

 Open the catalog to page 5
Digital density meter JL-T-6

Xi’an Yunyi Instrument Co.,Ltd Mob /WhatsApp:+86-17391853601 Email: [email protected] http://www.yunyiinstrument.com (I) weight instability: Removal method: remove the measuring platform and sink, and see if there is any foreign matter or water drop. If there is any foreign matter or water drop, please remove the foreign object or wipe it clean. (2) if the number appears -------- -e. If you do not return to zero, clear the object on the measuring table first and then contact the supplier to repair it. (3) if there is a fault that cannot be eliminated by itself, do not open the machine without...

 Open the catalog to page 6

All Xi'an Yunyi Instrument Co., Ltd. catalogs and technical brochures

  1. K series

    3  Pages

  2. YX-2006B

    2  Pages

  3. XY-2002

    1  Page

  4. YFM4800E

    14  Pages

  5. YD32

    2  Pages

  6. YD31 series

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.