GU27 Pressure Transmitter （Product Specification） XI'AN CHINASTAR M&C LIMITED Influential And Innovative Enterprise In Global Sensor

GU27 pressure transmitter can be used in the field of pressure measurement, including advanced intelligent manufacturing industry. The pressure measurement based on absolute pressure and gauge pressure can be realized by selecting high-precision MCS pressure element and special calibration circuit. GU27 pressure transmitter also has the advantages of high accuracy in the whole temperature range, high waterproof grade and high electromagnetic compatibility (EMC) level. It is a good choice as a pressure measurement. Applications • High-precision fluid measurement in advanced manufacturing field...

GU27 Pressure Transmitter Temperature: 20°C~25°C; Power supply: 24VDC/15VDC (output TTL level); Relative humidity: 45%~75%; ambient atmospheric pressure:86~106KPa;

GU27 Pressure Transmitter Structure and Dimension (mm)

GU27 Pressure TransmitterElectrical Connection M12X1-4P

GU27 Pressure Transmitter Code Output Code Accuracy Type a. The pressure transmitter must be used in the medium that is non-corrosive to the seal material and the housing material. b. In case the pressure guiding hole of the transmitter is blocked, it is forbidden to use sharp tools to clear it. Instead, one should remove the transmitter from the system, immerse the pressure guiding hole part in the liquid which can dissolve the blockage, and then the blockage will flow out easily. c. It's prohibited to open the transmitter by users for calibration or repair.

GU27 Pressure Transmitter d. Please contact us if you’re not sure whether the transmitter is suitable for the medium to be measured. e. The transmitter should be installed in a location that is not easily bumped or stepped on. f. Exceeding of the transmitter overload pressure may cause permanent damage. g. Where lightning may occur, customers should consider lightning protection measures. Disposal methods of hazardous wastes such as waste circuit boards and their components after the end of product life After the end of the product life, each part shall be distinguished according to the “National...

GU27 Pressure Transmitter Statement Chinastar Company. reserves the right to modify the specifications and contents of this instruction. No further notice will be given if any changes are made. Due to product updates, the individual details of this document may not match the product. Please refer to the actual product. The right to interpret this document belongs to Chinastar Company.