*mydirectindustry

CS-PT480

Product catalog summary

Application
The CS-PT480 submersible level transmitter is designed for high-accuracy and long-term stability in measuring water levels. It is resistant to abrasion, oil, acid, and alkali, making it suitable for potable water supply, reservoir, lake, and river monitoring. It complies with intrinsically safe and CE, UKCA certifications.

Deepwater level measurement
Hydrological monitoring
Water tank level monitoring
Water-saving irrigation
Circulating fluid monitoring
Water extraction projects

Product Description
The CS-PT480 features a diffused silicon pressure transmitter with multiple measurement ranges and outputs. It supports RS485 bus and MODBUS protocol and is available in intrinsically safe types.

Technical Parameters

Measurement Range: 0 to 350mH2O, customizable
Accuracy: ±0.25% or ±0.5% F.S at 25°C
Operating Temperature: -40°C to 85°C
Media Compatibility: 304 stainless steel default, 316L and Titanium optional
Power Supply: 12-30Vdc or 3.1-4.2Vdc
Response Time: 10ms
Compliant with CE, UKCA, EMC EN: 61326-1

Type Selection Guide
The guide provides codes for selecting measurement range, accuracy, output signal, power supply, seal material, cable material, and cable length.

Installation Notes

Use the sensor only with non-corrosive media.
Avoid using sharp tools to clean the pressure hole.
Install lightning protection in areas prone to lightning.
Ensure the transmitter does not touch bottom sediment.

Disposal Methods
After the product's life ends, parts should be classified according to the "National hazardous waste list." Non-hazardous waste should be treated as general industrial solid waste, while hazardous waste must be disposed of by qualified departments. Temporary storage must comply with national environmental protection standards.

Statement
Chinastar Company reserves the right to modify specifications and contents without notice. Product updates may result in discrepancies between the document and the actual product.

Catalog excerpts

Product Description CS-PT480 submersible level transmitter is a high-accuracy, compact structure, long terms stability product with high resistance to abrasion, oil, acid, and alkali cables. CS-PT480 is widely used in potable water supply, and reservoirs/lakes/river water monitoring. The CS-PT480 complies with intrinsically safe and CE^ UKCA certifications. ★ ± 0.25, ± 0.5% F.S ★ Diffused silicon pressure transmitter ★ Several special structures for different usage ★ Submersible Digit Level Transmitter ★ Multiply measurement range and output ★ CE.Intrinsically safe type available Application ★ Deepwater level measurement ★ Water tank level monitoring ★ Circulating fluid monitoring ★ Water extraction project www.websensor.com XI'AN CHINASTAR M&C LIMITED

Open the catalog to page 1

www.websensor.com XI'AN CHINASTAR M&C LIMITED

Open the catalog to page 2

Code Measurement Range 001Y 0-1m Code Accuracy Code Output Signal Code Power supply Code Seal material N NBR Code Cable material Code Cable Length www.websensor.com XI'AN CHINASTAR M&C LIMITED

Open the catalog to page 3

Electrical Connection Line color Line define Supply power Green / Blue www.websensor.com XI’AN CHINASTAR M&C LIMITED TEL: +86-29-88325620 FAX: +86-29-882377

Open the catalog to page 4

Installation Notes 1. Only use the pressure sensor to test the medium without corrosion to its housing and seal material. 2. Can not use sharp tools to clean the pressure hole when the hole of the pressure sensor is blocked. The pressure sensor shall be removed from the system and put the pressure hole part into the fluid which can dissolve the blocking substance. 3. To protect the transmitter used in areas with lightning, suggest adding a lightning protection device and reliably connecting the shield line to EARTH. 4. Drop the level transmitter into the container without touching the bottom...

Open the catalog to page 5

Disposal methods of hazardous wastes such as waste circuit boards and their components after the end of product life After the end of the product life, each part shall be distinguished according to the “National hazardous waste list” to determine whether it is hazardous waste. Among them, the waste lithium battery not disassembled is not hazardous waste, and the waste circuit board (including components, chips, plug-ins, pins, etc. attached to the waste circuit board) belongs to hazardous waste. The part that is not hazardous waste shall be treated as general industrial solid waste, and the lithium...

Open the catalog to page 6