Product Description CS-PT470 submersible level transmitter is a high-accuracy, compact structure, long terms stability product. with high resistance to abrasion, oil, acid, and alkali cables. CS-PT470 is widely used in potable water supply, and reservoirs/lakes/river water monitoring. The CS-PT470 complies with intrinsically safe and CE, UKCA certifications. ★ High accuracy diffused silicon pressure sensor ★ Several special structures for different usage ★ Anti-freezing, anti-blocking, anti-lightning strike ★ Multiply measurement range and output ★ Non-polarity two wire current output ★ CE.UKCA Intrinsically safe type available Application ★ Deepwater level measurement ★ Water tank level monitoring ★ Circulating fluid monitoring ★ Water extraction project www.websensor.com XI'AN CHINASTAR M&C LIMITED
Open the catalog to page 1www.websensor.com XI'AN CHINASTAR M&C LIMITED
Open the catalog to page 2- Universal type Code Measurement Range WH Filter nose type 003Y 0-3m Code Accuracy Code Output Signal Code Power supply Seal material Welded structure www.websensor.com XI'AN CHINASTAR M&C LIMITED
Open the catalog to page 3Electrical Connection Line color Line define Two line Three line Green / Blue Black Yellow www.websensor.com XI’AN CHINASTAR M&C LIMITED TEL: +86-29-88325620 FA
Open the catalog to page 41. Only use the pressure sensor to test the medium without corrosion to its housing and seal material. 2. Can not use sharp tools to clean the pressure hole when the hole of the pressure sensor is blocked. The pressure sensor shall be removed from the system and put the pressure hole part into the fluid which can dissolve the blocking substance. 3. To protect the transmitter used in areas with lightning, suggest adding a lightning protection device and reliably connecting the shield line to EARTH. 4. Drop the level transmitter into the container without touching the bottom sediment. 5. Please...
Open the catalog to page 5Disposal methods of hazardous wastes such as waste circuit boards and their components after the end of product life After the end of the product life, each part shall be distinguished according to the “National hazardous waste list” to determine whether it is hazardous waste. Among them, the waste lithium battery not disassembled is not hazardous waste, and the waste circuit board (including components, chips, plug-ins, pins, etc. attached to the waste circuit board) belongs to hazardous waste. The part that is not hazardous waste shall be treated as general industrial solid waste, and the lithium...
Open the catalog to page 69 Pages
7 Pages
7 Pages
6 Pages
5 Pages
6 Pages
5 Pages
6 Pages
6 Pages
5 Pages
6 Pages
6 Pages
4 Pages
5 Pages
6 Pages
8 Pages
7 Pages
9 Pages
8 Pages
1 Page
1 Page
1 Page
2 Pages
2 Pages
2 Pages
1 Page
1 Page
1 Page
1 Page