Product Description CS-PT430 submersible level transmitter is a high-accuracy, compact structure, long terms stability product with high resistance to abrasion, oil, acid, and alkali cables. CS-PT430 is widely used in potable water supply, and reservoirs/lakes/river water monitoring. CS-PT430 complies with CE, UKCA certifications. ★ High accuracy diffused silicon pressure sensor ★ Anti-freezing, anti-blocking, anti-lightning strike ★ Several special structures for different usage ★ Multiply measurement range and output ★ Non-polarity two wire current output ★ CE.UKCA Intrinsically safe type available Application ★ Deepwater level measurement ★ Water tank level monitoring ★ Circulating fluid monitoring ★ Water extraction project www.websensor.com XI'AN CHINASTAR M&C LIMITED

www.websensor.com XI'AN CHINASTAR M&C LIMITED

www.websensor.com XI'AN CHINASTAR M&C LIMITED

Electrical Connection Line color Red Green / Blue Line define Two line Three line Supply power Supply power Current output Voltage output Black Yellow www.websensor.com XI’AN CHINASTAR M&C LIMITED TEL: +86-29-88325620 FAX: +86-29-882377

Installation Notes 1. Only use the pressure sensor to test the medium without corrosion to its housing and seal material. 2. Can not use sharp tools to clean the pressure hole when the hole of the pressure sensor is blocked. The pressure sensor shall be removed from the system and put the pressure hole part into the fluid which can dissolve the blocking substance. 3. To protect the transmitter used in areas with lightning, suggest adding a lightning protection device and reliably connecting the shield line to EARTH. 4. Drop the level transmitter into the container without touching the bottom...

Disposal methods of hazardous wastes such as waste circuit boards and their components after the end of product life After the end of the product life, each part shall be distinguished according to the “National hazardous waste list” to determine whether it is hazardous waste. Among them, the waste lithium battery not disassembled is not hazardous waste, and the waste circuit board (including components, chips, plug-ins, pins, etc. attached to the waste circuit board) belongs to hazardous waste. The part that is not hazardous waste shall be treated as general industrial solid waste, and the lithium...