*mydirectindustry

CS-PT400

Product catalog summary

Application
The CS-PT400 submersible level transmitter is designed for high-accuracy and long-term stability in measuring water levels. It is resistant to abrasion, oil, acid, and alkali, making it suitable for potable water supply, reservoir, lake, and river monitoring. It is certified as intrinsically safe and complies with CE and UKCA standards.

Deepwater level measurement
Hydrological monitoring
Water tank level monitoring
Water-saving irrigation
Circulating fluid monitoring
Water extraction projects

Product Description
The CS-PT400 features high accuracy with a diffused silicon pressure sensor and offers multiple measurement ranges and outputs. It is available in several types, including anti-freezing and anti-lightning strike versions, and supports non-polarity two-wire current output.

Technical Parameters

Measurement Range: 0~1 to 350mH2O (customizable)
Accuracy: ±0.25%F.S, ±0.5%F.S
Operating Temperature: -40℃ to +85℃
Output Signal: 4~20mA, 0.5-4.5V, 0-10V
Power Supply: 12~30Vdc, 5Vdc
Material Compatibility: 304/316L stainless steel, Titanium
Compliant with CNEX, CE, UKCA

Type Selection Guide
The guide provides codes for selecting the type, measurement range, accuracy, output signal, power supply, seal material, cable material, and cable length.

Installation Notes

Use the sensor only with non-corrosive media.
Avoid using sharp tools to clean the pressure hole.
Use a lightning protection device in areas prone to lightning.
Ensure the transmitter does not touch bottom sediment.

Disposal Methods
After the product's life ends, parts should be classified according to the "National hazardous waste list." Non-hazardous waste should be treated as general industrial solid waste, while hazardous waste must be disposed of by qualified departments. Temporary storage must comply with national environmental protection standards.

Statement
Chinastar Company reserves the right to modify specifications and contents without notice. The document may not match the product due to updates, and the company holds the right to interpret the document.

Catalog excerpts

Product Description CS-PT400 submersible level transmitter is a high-accuracy, compact structure, long terms stability product. with high resistance to abrasion, oil, acid, and alkali cables. CS-PT400 is widely used in potable water supply, and reservoirs/lakes/river water monitoring. The CS-PT400 complies with intrinsically safe and CE, UKCA certifications. ★ High accuracy diffused silicon pressure sensor ★ Anti-freezing, anti-blocking, anti-lightning strike ★ Several special structures for different usage ★ Multiply measurement range and output ★ Non-polarity two wire current output ★ CE.UKCA Intrinsically safe type available Application ★ Deepwater level measurement ★ Water tank level monitoring ★ Circulating fluid monitoring ★ Water extraction project www.websensor.com XI'AN CHINASTAR M&C LIMITED

Open the catalog to page 1

www.websensor.com XI'AN CHINASTAR M&C LIMITED

Open the catalog to page 2

Type Selection Guide CS-PT400 Code Power supply Seal Material Welded structure Code Cable Material Code Cable 3/6 www.websensor.com XI'AN CHINASTAR M&C LIMITED

Open the catalog to page 3

www.websensor.com XI'AN CHINASTAR M&C LIMITED

Open the catalog to page 4

Installation Notes 1. Only use the pressure sensor to test the medium without corrosion to its housing and seal material. 2. Can not use sharp tools to clean the pressure hole when the hole of the pressure sensor is blocked. The pressure sensor shall be removed from the system and put the pressure hole part into the fluid which can dissolve the blocking substance. 3. To protect the transmitter used in areas with lightning, suggest adding a lightning protection device and reliably connecting the shield line to EARTH. 4. Drop the level transmitter into the container without touching the bottom...

Open the catalog to page 5

Disposal methods of hazardous wastes such as waste circuit boards and their components after the end of product life After the end of the product life, each part shall be distinguished according to the “National hazardous waste list” to determine whether it is hazardous waste. Among them, the waste lithium battery not disassembled is not hazardous waste, and the waste circuit board (including components, chips, plug-ins, pins, etc. attached to the waste circuit board) belongs to hazardous waste. The part that is not hazardous waste shall be treated as general industrial solid waste, and the lithium...

Open the catalog to page 6