CS-PT1800 Pressure Transmitter （Product Specification） XI'AN CHINASTAR M&C LIMITED

PT1800 pressure transmitter is a pressure transmitter specially developed for refrigerant pressure measurement. The selection of ceramic capacitive sensitive components and special calibration circuits can realize pressure measurement based on absolute vacuum or sealed gauge pressure. The product can withstand large destructive pressure, and also has the advantages of high accuracy at working temperature, high waterproof level, anti-condensation water, etc. It is an ideal choice for refrigerant pressure measurement. We can supply you with different pressure units and process connections in short...

CS-PT1800Series Pressure TransmitterPerformance Specifications Temperature: 20~25°C; Power supply: 5VDC; Relative humidity: 45%~75%; ambient atmospheric pressure: 86KPa~106KPa;

CS-PT1800Series Pressure Transmitter Shell Material Note 2: The product defaults to full-scale output of 4.5VDC without clamping. That is, when the product is in normal use (the input pressure is not overloaded), the full-scale output is 4.5VDC. When the product is overloaded (the pressure exceeds the product's measurement range), the output voltage will exceed 4.5VDC, but it still maintains a linear relationship with the input pressure (that is, the output voltage increases proportionally with the increase of the input pressure, and the magnitude of the overload pressure can still be tested...

CS-PT1800Series Pressure Transmitter Cable tie. PA66

Model Selection Tips PT1800 Series Pressure Transmitter Code Measuring Range X X stands for actual pressure measuring range Code Pressure Connection 7/16U(F) 7/16-20UNF-2B $ 6.35I 06.35 straight copper tube Code Electrical Connection P Packard Metri-Pack Code Output Notes 1. When welding 06.35/ 06 pressurization copper pipe, cooling measures must be taken to ensure that the temperature of the sensor body does not exceed 120°C, which will damage the sealing performance of the sensor. Power Supply Code Accuracy

CS-PT1800Series Pressure Transmitter 2. The transmitter must be used in a medium that is not corrosive to the sealing material and housing material. 3. When the pressure-guiding hole of the transmitter is blocked, it is strictly forbidden to use a sharp tool to clear the pressure-guiding hole. The transmitter should be removed and the pressure-guiding hole should be immersed in a liquid that can dissolve the blockage. After the blockage is dissolved, remove it fall out. 4. It is strictly forbidden to open the transmitter for calibration or maintenance by yourself. 5. If you are not sure whether...

Disposal methods of hazardous wastes such as waste circuit boards and their components after the end of product life. After the end of the product life, each part shall be distinguished according to the “National hazardous waste list” to determine whether it is hazardous waste. Among them, the waste lithium battery not disassembled is not hazardous waste, and the waste circuit board (including components, chips, plug-ins, pins, etc. attached to the waste circuit board) belongs to hazardous waste. The part that is not hazardous waste shall be treated as general industrial solid waste, and the...