CS-iWPT302-T Bluetooth Temperature Sensor （Product Specification） XI'AN CHINASTAR M&C LIMITED

The CS-iWPT302-T wireless Bluetooth temperature transmitter is mainly used for temperature acquisition and monitoring of oil, gas, heating and other transportation pipelines, as well as tanks and other facilities. The product is transmitted via Bluetooth and can be configured with parameters and monitored for data collection through a mobile app. It can also be used in conjunction with a Bluetooth host (Bluetooth data collector) to receive Bluetooth data. The CS-iWPT302-T is equipped with a disposable lithium battery and features a low-power design, with a lifespan of up to 5 years. The product...

Note 1: Due to the influence of the shell material, the standard model can only measure temperatures of -40 to 125 °C for a short period of time; Note 2: The sampling interval setting range is 2-180 seconds (default 60 seconds), and the Bluetooth broadcast interval setting range is 1-10 seconds (default 10 seconds) Standard type

CS-iWPT302-T Bluetooth temperature sensor Non-standard type Outline dimension drawing (unit: mm) The product is in a deep sleep state after leaving the factory: no broadcasting, no sampling. When using the product, activation is required. Activation method: Use a magnet to cross the top. After successful activation, it will automatically send a non-connectable broadcast. Open mobile phone Bluetooth or other Bluetooth devices to scan Bluetooth broadcast information (product Bluetooth broadcast name: "CS-IWPT_T"), parse Bluetooth broadcast data to obtain temperature values. Refer to " CS-iWPT302-T-XY-Communication...

CS-iWPT302-T Bluetooth temperature sensor Open the Notify channel under this UUID, and enter the modification broadcast interval instruction: “intva3-“ in the write channel. After successful modification, the Notify channel will return: “OK,Intva:3”. Battery Level The diagram of voltage and remaining electricity is as follows：

CS-iWPT302-T Bluetooth temperature sensor Attentions： a. The transmitter must be used in a medium that is non corrosive to the shell material; b. It is strictly prohibited to open the transmitter for calibration, maintenance, or battery replacement by oneself; c. If unsure if the transmitter is suitable for the measuring medium used, please contact the manufacturer; d. The installation location of the transmitter should be chosen in a place that is not easily bumped or stepped on; f. Using beyond the measurement range of the transmitter may cause permanent damage. Disposal method for waste circuit...

CS-iWPT302-T Bluetooth temperature sensor reported to the competent department of environmental protection. Hazardous waste transfer activities can be arranged according to the actual production situation, and the transfer process shall strictly implement the transfer joint document system. Declarations The company reserves the right to modify the specifications and contents of this manual. Subject to change without prior notice. Due to the update of the product, the individual details of this document may not be consistent with the product, please refer to the actual product. The right to interpret...