High Voltage Power AmplifierATA-4011C
3Pages

ATA-4011B High Voltage Power Amplifier  Maximum output voltage 160Vp-p(±80Vp)  Maximum output current 1.41Ap  Bandwidth（-3dB）DC~1.2MHz  Slew rate ≥426V/μs  Dc offset voltage ±75V  Operating voltage AC110V~240V，50/60Hz Description ATA-4011Bis a single-channel high voltage amplifier capable of amplifying AC/DC signals. Maximum output 160Vp-p（± 80Vp）voltage，112.8Wp power，can drive high voltage power type load. The voltage gain can be adjusted by numerical control, and the setting parameters can be saved automatically. It can be used with signal generator to realize the lossless amplification of the signal. Input BNC connector for the port of Input, input resistance 50 Ω ,10k Ω optional, which can match the mainstream signal generator brands on the market. LCD Display ATA-4011B adopts LCD screen to display the equipment status and parameters. The operation interface is simple and easy to understand. Voltage Gain Voltage gain 0-50 times continuously adjustable, 1 step for coarse tuning, 0.1 step for fine tuning. Combined with the LCD display of voltage gain, the required voltage v

Monitor 20mV/V Monitor：the port voltage is 1/50 of the Output port, BNC connector for the Monitor port, which can be connected to the oscilloscope directly to achieve real time monitoring of the output voltage. 1V/A Monitor：the port current is 1 time of the Output port, BNC connector for the Monitor port, which can be connected to the oscilloscope directly to achieve real time monitoring of the output current. Output Banana connector for the port of Output Maximum output voltage 160Vp-p(±80Vp) Maximum output current 1.41

Output Voltage Error Voltage Monitor Single-ended output Current Monitor Zero Drift of Output Voltage Output Connector Over current protection Signal Ground Connected to the case and power line Voltage Gain Supply Voltage Operating Temperature Storage Temperature Slew Rate Output Impedance Input Resistance Input Amplitude Upper Limit of Load RL Ordering Information Model: DC~1.2MHz（-3dB）high voltage power amplifier Accessories: Contact: Power Cord*1 pc，BNC Cable*3 pcs, Output Cable*1 set, Safety Tube *1 pc，Product