High-voltage amplifier Aigtek ATA-7030 High-Voltage Amplifier

Product catalog summary

Introduction
The ATA-7030 is a high voltage amplifier designed for amplifying both AC and DC signals. It features a single-ended output with a maximum voltage of 6kVp-p (±3kVp) and can drive high-voltage loads. The amplifier offers digitally adjustable voltage gain, allowing for convenient operation and the ability to save frequently used settings.

Specifications

Channels: 1
Output Type: Single-ended
Bandwidth: DC~5kHz
Maximum Output Voltage: 6kVp-p (±3kVp)
Maximum Output Current: 15mAp (DC~50Hz), 30mAp (>50Hz)
Maximum Output Power: 90Wp
Voltage Gain: x0~1000
Slew Rate: ≥ 67V/μs
Output Voltage Error: ≤ ±1% @(DC, 3kV)
Input Impedance: 10kΩ
Output Impedance: 1.5kΩ
THD: ≤ 1%@1kHz, 4.8kVp-p
Output Protection: Over Current Protection
Power Supply: AC 220V±10%, 50Hz
Operating Temperature: 0°C ~ 45°C
Dimensions: 442*164*574mm

Features
The amplifier includes an LCD panel for displaying device status and parameters, a BNC connector for input, and an SHV RF connector for output. It also features a 1/1000 monitor port for real-time voltage monitoring via an oscilloscope.

Accessories
The package includes a power cable, BNC cables, a high voltage output cable set, a USB cable, a fuse, a user manual, a usage guide, a product qualification certificate, a calibration certificate, and a packing list.

Contact Information
For more information, contact Xi'an Aigtek Electronic Technology Co., Ltd. at +86-29-88865020.

Catalog excerpts

High-voltage amplifier Aigtek ATA-7030 High-Voltage Amplifier-1

Xi'an Aigtek Electronic Technology Co., Ltd. ATA-7030 High Voltage Amplifier  Single channel  Bandwidth (-3dB): DC~5kHz  Maximum Output Voltage: 6kVp-p (±3kVp)  Maximum Output Current: 30mAp  Slew Rate: ≥67V/μs INTRODUCTION The ATA-7030 is an ideal high voltage amplifier capable of amplifying both AC and DC signals.It provides single-ended output up to 6kVp-p (±3kVp) and can drive high-voltage loads. The voltage gain is digitally adjustable, and frequently used settings can be saved with a single click, offering convenient and straightforward operation. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. INPUT Input via a BNC connector. VOLTAGE GAIN The voltage gain is digitally adjustable from x0 to x1000. Combined with the gain display on the LCD panel, the voltage can be quickly and precisely adjusted as needed. OUTPUT Output via an SHV RF connector, with a maximum output voltage of 6kVp-p (±3kVp) and a maximum output current of 30mAp. MONITOR 1/1000 Monitor: This port voltage is 1/1000 of the output port voltage. The monitoring port uses a BNC connector and can be directly connected to an oscilloscope for real-time monitoring of the output voltage.

Open the catalog to page 1