Xi'an Aigtek Electronic Technology Co., Ltd. ATG-308 Power Signal Source  Capable of outputting sine waves, square waves, triangle waves, and pulse waves  Internal or external input signal  Maximum Output Power: 720Wp  Bandwidth (-3dB): DC~30kHz  Digitally adjustable voltage gain INTRODUCTION The ATG-308 is an ideal power signal source capable of outputting sine, square, triangle, and pulse waveforms. Users can select either internal or external input signals based on their needs. With a maximum output power of 720Wp, it can drive high-power loads. The digitally adjustable voltage gain makes operation more convenient and user-friendly. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. VOLTAGE GAIN When an external input signal is used, the device operates in amplifier mode. In this mode, the voltage gain is digitally adjustable from 0 to 60 times in 1 step increments. Combined with the gain display on the LCD panel, the voltage can be quickly and precisely adjusted as needed. INPUT The external signal input uses a BNC connector. When an internal input signal is used, the device functions in power signal source mode, allowing users to set waveform, frequency, voltage, and other parameters. When an external signal is connected, the device operates in amplifier mode, with an input impedance of 5kΩ. The output impedance is switchable, and adjusting the voltage gain achieves signal amplification. OUTPUT The output interface uses banana sockets, with a maximum output voltage of 180Vp-p (±90Vp), and a maximum output current of 8Ap.

Xi'an Aigtek Electronic Technology Co., Ltd.