ATG-3040 Power Signal Source

Product catalog summary

Introduction
The ATG-3040 is a versatile power signal source capable of generating sine, square, triangle, and pulse waveforms. It supports both internal and external input signals, offering a maximum output power of 360Wp. The device features digitally adjustable voltage gain for user-friendly operation.

Specifications

Model: ATG-3040
Number of Channels: 1
Output Type: Single-ended
Output Waveforms: Sine, Square, Triangle, Pulse
Bandwidth: DC~100kHz
Maximum Output Voltage: 90Vp-p (±45Vp)
Maximum Output Current: 4Ap (DC~50Hz), 8Ap (>50Hz)
Maximum Output Power: 360Wp
Voltage Gain: 0 to 30 times
Input Impedance: 5kΩ
Output Impedance: 0.1Ω/50Ω (customizable)
Signal-to-Noise Ratio: ≥80dB
Protection: Over Current Protection

Features
The device includes an LCD panel for displaying status and parameters, enhancing user interaction. It operates in amplifier mode with external signals and in power signal source mode with internal signals. The output interface uses banana sockets, and the device is equipped with over-current protection.

Environmental and Physical Specifications

Power Supply Voltage: AC220V±10%, 50Hz
Operating Temperature: 0°C ~ 45°C
Storage Temperature: -20°C ~ 50°C
Working Humidity: ≤ 80% RH, non-condensing
Dimensions: 442*164*474mm (W*H*D)
Warranty: 1 year

Accessories
The product comes with a power cable, BNC cable, red-black output cable set, USB cable, fuse, user manual, usage guide, product qualification certificate, calibration certificate, and packing list.

Catalog excerpts

Xi'an Aigtek Electronic Technology Co., Ltd. ATG-3040 Power Signal Source  Capable of outputting sine waves, square waves, triangle waves, and pulse waves  Internal or external input signal  Maximum Output Power: 360Wp  Bandwidth (-3dB): DC~100kHz  Digitally adjustable voltage gain INTRODUCTION The ATG-3040 is an ideal power signal source capable of outputting sine, square, triangle, and pulse waveforms. Users can select either internal or external input signals based on their needs. With a maximum output power of 360Wp, it can drive high-power loads. The digitally adjustable voltage gain makes operation more convenient and user-friendly. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. VOLTAGE GAIN When an external input signal is used, the device operates in amplifier mode. In this mode, the voltage gain is digitally adjustable from 0 to 30 times in 1 step increments. Combined with the gain display on the LCD panel, the voltage can be quickly and precisely adjusted as needed. INPUT The external signal input uses a BNC connector. When an internal input signal is used, the device functions in power signal source mode, allowing users to set waveform, frequency, voltage, and other parameters. When an external signal is connected, the device operates in amplifier mode, with an input impedance of 5kΩ. The output impedance is switchable, and adjusting the voltage gain achieves signal amplification. OUTPUT The output interface uses banana sockets, with a maximum output voltage of 90Vp-p (±45Vp), and a maximum output current of 8Ap.

Open the catalog to page 1