ATG-2161 Power Signal Source

Product catalog summary

Introduction
The ATG-2161 is a single-channel power signal source designed to output various waveforms including sine, square, triangle, and pulse waves. It supports both internal and external input signals, with a maximum output voltage of 1600Vp-p (±800Vp) and a maximum output current of 40mAp. The device features a digitally adjustable voltage gain for user convenience.

Specifications

Model: ATG-2161
Number of Channels: 1
Output Type: Differential output
Output Waveforms: Sine, Square, Triangle, Pulse
Bandwidth: DC~150kHz
Maximum Output Voltage: 1600Vp-p (±800Vp)
Maximum Output Current: 20mAp (DC~50Hz), 40mAp (>50Hz)
Maximum Output Power: 32Wp
Voltage Gain: 0 to 240 times
Input Impedance: 5kΩ
Output Impedance: 200Ω/10kΩ
Slew Rate: ≥534V/μs
Signal-to-Noise Ratio: ≥80dB
Power Supply Voltage: AC220V±10%, 50Hz
Operating Temperature: 0°C ~ 45°C
Storage Temperature: -20°C ~ 50°C
Dimensions: 366*164*369mm (W*H*D)

Features
The device includes an LCD panel for displaying status and parameters, a BNC connector for external signal input, and banana sockets for output. It also has a 1/100 monitoring port for real-time voltage monitoring via an oscilloscope.

Protection and Safety
The ATG-2161 is equipped with over-current protection and has a signal ground connected to the enclosure and power line ground.

Accessories
The product comes with a power cable, BNC cables, red-black output cable, USB cable, fuse, user manual, usage guide, product qualification certificate, calibration certificate, and packing list.

Catalog excerpts

Xi'an Aigtek Electronic Technology Co., Ltd. ATG-2161 Power Signal Source  Capable of outputting sine waves, square waves, triangle waves, and pulse waves  Internal or external input signal  Maximum Output Voltage: 1600Vp-p (±800Vp)  Maximum Output Current: 40mAp  Bandwidth (-3dB): DC~150kHz INTRODUCTION The ATG-2161 is an ideal single-channe power signal source capable of outputting sine, square, triangle, and pulse waveforms. Users can select either internal or external input signals based on their needs. With a maximum output voltage of 16000Vp-p (±800V), it can drive high-voltage loads. The digitally adjustable voltage gain makes operation more convenient and user-friendly. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. VOLTAGE GAIN When an external input signal is used, the device operates in amplifier mode. In this mode, the voltage gain is digitally adjustable from 0 to 240 times in 1 step increments. Combined with the gain display on the LCD panel, the voltage can be quickly and precisely adjusted as needed. INPUT The external signal input uses a BNC connector. When an internal input signal is used, the device functions in power signal source mode, allowing users to set waveform, frequency, voltage, and other parameters. When an external signal is connected, the device operates in amplifier mode, with an input impedance of 5kΩ. The output impedance is switchable, and adjusting the voltage gain achieves signal amplification. OUTPUT The output interface uses banana sockets, with a maximum output voltage of 1600Vp-p (±800Vp) and a maximum output current of 40mAp. MONITORING PORTS 1/100 Monitor：The voltage of this port is 1/100 of that of the output port. The monitoring port is a BNC connector and can be connected to an oscilloscope for real-time monitoring of the output voltage.

Open the catalog to page 1