ATG-2081 Power Signal Source

Product catalog summary

Introduction
The ATG-2081 is a versatile single-channel power signal source capable of generating sine, square, triangle, and pulse waveforms. It supports both internal and external input signals, with a maximum output voltage of 800Vp-p (±400V) and a maximum output current of 40mAp. The device features a digitally adjustable voltage gain for user-friendly operation.

Specifications

Model: ATG-2081
Number of Channels: 1
Output Type: Single-ended
Output Waveforms: Sine, Square, Triangle, Pulse
Bandwidth: DC~200kHz
Maximum Output Voltage: 800Vp-p (±400Vp)
Maximum Output Current: 20mAp (DC~50Hz), 40mAp (>50Hz)
Maximum Output Power: 16Wp
Voltage Gain: x0~120 (1 step)
Input Impedance: 5kΩ
Output Impedance: 100Ω/5kΩ
Slew Rate: ≥356V/μs
Signal-to-Noise Ratio: ≥80dB
Protection: Over Current Protection
Power Supply Voltage: AC220V±10%, 50Hz
Operating Temperature: 0°C ~ 45°C
Dimensions: 366*164*369mm (W*H*D)

Features
The device includes an LCD panel for displaying status and parameters, a BNC connector for external signal input, and banana sockets for output. It also has monitoring ports for real-time voltage and current monitoring via an oscilloscope.

Accessories
The ATG-2081 comes with a power cable, BNC cables, red-black output cable set, USB cable, fuse, user manual, usage guide, product qualification certificate, calibration certificate, and packing list.

Contact Information
For more information, contact Xi'an Aigtek Electronic Technology Co., Ltd. at +86-29-88865020 or visit www.aigtek.cn.

Catalog excerpts

Xi'an Aigtek Electronic Technology Co., Ltd. ATG-2081 Power Signal Source  Capable of outputting sine waves, square waves, triangle waves, and pulse waves  Internal or external input signal  Maximum Output Voltage: 800Vp-p (±400Vp)  Maximum Output Current: 40mAp  Bandwidth (-3dB): DC~200kHz INTRODUCTION The ATG-2081 is an ideal single-channel power signal source capable of outputting sine, square, triangle, and pulse waveforms. Users can select either internal or external input signals based on their needs. With a maximum output voltage of 800Vp-p (±400V), it can drive high-voltage loads. The digitally adjustable voltage gain makes operation more convenient and user-friendly. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. VOLTAGE GAIN When an external input signal is used, the device operates in amplifier mode. In this mode, the voltage gain is digitally adjustable from 0 to 120 times in 1 step increments. Combined with the gain display on the LCD panel, the voltage can be quickly and precisely adjusted as needed. INPUT The external signal input uses a BNC connector. When an internal input signal is used, the device functions in power signal source mode, allowing users to set waveform, frequency, voltage, and other parameters. When an external signal is connected, the device operates in amplifier mode, with an input impedance of 5kΩ. The output impedance is switchable, and adjusting the voltage gain achieves signal amplification. OUTPUT The output interface uses banana sockets, with a maximum output voltage of 800Vp-p (±400Vp) and a maximum output current of 40mAp. MONITORING PORTS 10mV/V Monitor: This port is for voltage monitoring and can be connected to an oscilloscope for real-time monitoring of the output voltage. 20V/A Monitor: This port is for current monitoring and can be connected to an oscilloscope for real-time monitoring of the output current. www.aigtek.cn Contact Us: +86-

Open the catalog to page 1