ATG-2042 Power Signal Source

Product catalog summary

Introduction
The ATG-2042 is a dual-channel power signal source capable of outputting various waveforms including sine, square, triangle, and pulse. It supports both internal and external input signals, with a maximum output voltage of 400Vp-p (±200V) and a maximum output current of 100mAp. The device features a digitally adjustable voltage gain for user convenience.

Specifications

Model: ATG-2042
Number of Channels: 2
Output Type: Single-ended
Waveforms: Sine, Square, Triangle, Pulse
Bandwidth: DC~500kHz
Maximum Output Voltage: 400Vp-p (±200Vp)
Maximum Output Current: 50mAp (DC~50Hz), 100mAp (>50Hz)
Maximum Output Power: 20Wp
Voltage Gain: x0~60 (1 step)
Output Impedance: 50Ω/2.5kΩ
Slew Rate: ≥445V/μs
Input Impedance: 5kΩ
Output Voltage Error: ≤±3%FS@1kHz
THD: ≤0.1%@1kHz, 100Vp-p
Signal-to-Noise Ratio: ≥80dB
Protection: Over Current Protection
Power Supply: AC220V±10%, 50Hz
Operating Temperature: 0°C ~ 45°C
Dimensions: 366*164*369mm

Features
The device includes an LCD panel for displaying status and parameters, a BNC connector for external signal input, and banana sockets for output. It also has monitoring ports for real-time voltage and current monitoring via an oscilloscope.

Accessories
The package includes a power cable, BNC cables, red-black output cables, a USB cable, a fuse, a user manual, a usage guide, a product qualification certificate, a calibration certificate, and a packing list.

Catalog excerpts

Xi'an Aigtek Electronic Technology Co., Ltd. ATG-2042 Power Signal Source  Capable of outputting sine waves, square waves, triangle waves, and pulse waves  Internal or external input signal  Maximum Output Voltage: 400Vp-p (±200Vp)  Maximum Output Current: 100mAp  Bandwidth (-3dB): DC~500kHz INTRODUCTION The ATG-2042 is an ideal dual-channel power signal source capable of outputting sine, square, triangle, and pulse waveforms. Users can select either internal or external input signals based on their needs. With a maximum output voltage of 400Vp-p (±200V), it can drive high-voltage loads. The digitally adjustable voltage gain makes operation more convenient and user-friendly. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. VOLTAGE GAIN When an external input signal is used, the device operates in amplifier mode. In this mode, the voltage gain is digitally adjustable from 0 to 60 times in 1 step increments. Combined with the gain display on the LCD panel, the voltage can be quickly and precisely adjusted as needed. INPUT The external signal input uses a BNC connector. When an internal input signal is used, the device functions in power signal source mode, allowing users to set waveform, frequency, voltage, and other parameters. When an external signal is connected, the device operates in amplifier mode, with an input impedance of 5kΩ. The output impedance is switchable, and adjusting the voltage gain achieves signal amplification. OUTPUT The output interface uses banana sockets, with a maximum output voltage of 400Vp-p (±200Vp) and a maximum output current of 100mAp. MONITORING PORTS 10mV/V Monitor: This port is for voltage monitoring and can be connected to an oscilloscope for real-time monitoring of the output voltage. 10V/A Monitor: This port is for current monitoring and can be connected to an oscilloscope for real-time monitoring of the output current. www.aigtek.cn Contact Us: +86-

Open the catalog to page 1