ATA-P5000 Preamplifier Low-Noise Power Supply

Product catalog summary

Introduction
The ATA-P5000 is a low-noise power supply designed for the ATA-5000 series preamplifiers. It provides a stable DC 15V output with a maximum current of 200mA, ensuring optimal performance of the connected preamplifiers.

Specifications

Output Voltage: DC 15V
Maximum Output Current: 200mA
Output Noise Voltage: Less than 50µVrms (10Hz to 20MHz)
Fuse: 0.5A/250V
Power Supply Voltage: AC 220V±10%, 50Hz
Operating Temperature: 0°C to 45°C
Storage Temperature: -20°C to 50°C
Working Humidity: ≤ 80% RH, non-condensing
Warranty: 1 year
Dimensions: 150*96*211mm (W*H*D)

Power Interface
The power interface uses a LEMO socket (model: 0B EGG, 2 pins) with a DC 15V/200mA output. The positive terminal is marked in red and should align with the corresponding part of the power cable.

Accessories

Power cable
LEMO (0B FGG, 2-pin) power cable
Fuse
User manual
Usage guide
Product qualification certificate
Calibration certificate
Packing list

Contact Information
For further inquiries, contact Xi'an Aigtek Electronic Technology Co., Ltd. at +86-29-88865020.

Catalog excerpts

ATA-P5000 Preamplifier Low-Noise Power Supply-1

Xi’an Aigtek Electronic Technology Co., Ltd. The ATA-P5000 preamplifier low-noise power supply provides a stable and low-noise power source for the ATA-5000 series preamplifiers, ensuring their performance specifications. The output voltage is DC 15V, with a maximum output current of 200mA. The power interface is a LEMO socket (model: 0B EGG, 2 pins). The power output is DC 15V/200mA. The red-marked end of the power interface is the positive terminal, which should align with the red-marked part of the power cable.

Open the catalog to page 1