Xi'an Aigtek Electronic Technology Co., Ltd. ATA-P2010 Power Amplifier  Single Channel  Output Voltage Range: -20V~130V  Maximum Output Current: 10Ap  Bandwidth (-3dB): DC~20kHz  Slew Rate: ≥11.5 V/μs INTRODUCTION The ATA-P2010 is an ideal single-channel power amplifier capable of amplifying both AC and DC signals. It delivers a maximum output power of 1300Wp and can drive piezoelectric ceramics, stacked piezoelectric ceramics, open-loop packaged piezoelectric ceramics, as well as piezo-driven devices such as nanopositioning stages. The digitally adjustable voltage gain allows precise tuning, with one-click saving of common settings for convenient and user-friendly operation. It is compatible with mainstream signal generators, delivering excellent signal amplification. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. VOLTAGE GAIN The voltage gain is digitally adjustable from 0~50x, with two modes: coarse adjustment (1 step) and fine adjustment (0.1 step). Combined with the gain display on the LCD panel, the voltage can be quickly and precisely adjusted as needed. INPUT The input uses a BNC connector with an input impedance of 10kΩ. OUTPUT The output uses banana sockets, with an output voltage range of -20V~130V and a maximum output current of 10Ap. MONITORING PORTS Output Current Monitor: 250mV/A Output Voltage Monitor: 50mV/V The output monitoring port uses a BNC connector and can be directly connected to an oscilloscope for real-time monitoring.

Xi'an Aigtek Electronic Technology Co., Ltd.