ATA-P1005 Power Amplifier

Product catalog summary

Introduction
The ATA-P1005 is a single-channel power amplifier designed for amplifying both AC and DC signals. It provides a maximum output power of 750Wp and is suitable for driving piezoelectric ceramics and devices like nanopositioning stages. The amplifier features digitally adjustable voltage gain for precise tuning and is compatible with mainstream signal generators.

Specifications

Output Voltage Range: 0V to 150V
Maximum Output Current: 5Ap
Bandwidth (-3dB): DC to 10kHz
Slew Rate: ≥6.7 V/μs
Voltage Gain: Adjustable from 0 to 50x
Input Impedance: 10kΩ
Output Impedance: 0.5Ω
Protection: Over Current, Over Voltage, and Over Temperature Protection
Power Supply: AC110~240V, 50/60Hz
Operating Temperature: 0°C to 45°C
Dimensions: 442*164*574mm

Features
The amplifier includes an LCD panel for displaying device status and parameters, offering a user-friendly interface. It has monitoring ports for output current and voltage, allowing real-time monitoring via an oscilloscope.

Output and Input
The input uses a BNC connector with a 10kΩ impedance, while the output uses banana sockets with a voltage range of 0V to 150V and a maximum current of 5Ap.

Accessories
The package includes a power cable, BNC cables, red-black output cable, USB cable, fuse, user manual, usage guide, product qualification certificate, calibration certificate, and packing list.

Catalog excerpts

Xi'an Aigtek Electronic Technology Co., Ltd. ATA-P1005 Power Amplifier  Single Channel  Output Voltage Range: 0V~150V  Maximum Output Current: 5Ap  Bandwidth (-3dB): DC~10kHz  Slew Rate: ≥6.7 V/μs INTRODUCTION The ATA-P1005 is an ideal single-channel power amplifier capable of amplifying both AC and DC signals. It delivers a maximum output power of 750Wp and can drive piezoelectric ceramics, stacked piezoelectric ceramics, open-loop packaged piezoelectric ceramics, as well as piezo-driven devices such as nanopositioning stages. The digitally adjustable voltage gain allows precise tuning, with one-click saving of common settings for convenient and user-friendly operation. It is compatible with mainstream signal generators, delivering excellent signal amplification. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. VOLTAGE GAIN The voltage gain is digitally adjustable from 0~50x, with two modes: coarse adjustment (1 step) and fine adjustment (0.1 step). Combined with the gain display on the LCD panel, the voltage can be quickly and precisely adjusted as needed. INPUT The input uses a BNC connector with an input impedance of 10kΩ. OUTPUT The output uses banana sockets, with an output voltage range of 0V~150V and a maximum output current of 5Ap. MONITORING PORTS Output Current Monitor: 500mV/A Output Voltage Monitor: 50mV/V The output monitoring port uses a BNC connector and can be directly connected to an oscilloscope for real-time monitoring.

Open the catalog to page 1