Xi'an Aigtek Electronic Technology Co., Ltd. ATA-8126 RF Power Amplifier  Operating Mode: Class A  Operating Frequency: 100kHz~12MHz  P1dB Output Power: 300W  Saturated Output Power: 600W  Power Gain: 52dB INTRODUCTION ATA-8126 is an RF power amplifier featuring a P1dB output power of 300W and a saturated output power of 600W. The digitally adjustable gain enables precise tuning, with one-click saving of settings for convenient and user-friendly operation. It is compatible with mainstream signal generators, delivering excellent RF signal amplification. The wide-range power supply accommodates different regional power standards worldwide. LCD PANEL DISPLAY The ATA-8126 features an LCD panel that dynamically displays device status and parameters. The user interface is intuitive, clear, and easy to understand, ensuring a user-friendly experience. COOLING METHOD Combining high-efficiency water cooling circulation technology with intelligent temperature control algorithms, it reduces noise while improving heat dissipation efficiency, significantly enhancing the performance stability of the instrument. POWER GAIN The amplifier provides a power gain of 52dB (adjustable from 32dB to 52dB in 0.5dB steps). Combined with the gain display on the LCD panel, parameters can be quickly and precisely adjusted as needed. OUTPUT PROTECTION The input uses a BNC connector with an input impedance of 50Ω. The output uses an N-type connector with an output impedance of 50Ω. No-load operation prohibited! Over Current Protection, Over Temperature Protection, and Maximum Reflected Power Protection. When the current, temperature, or reflected power of the device exceeds the threshold during operation, the protection will be triggered, and the instrument will shut off the output. TYPICAL APPLICATIONS Piezoelectric Ceramic Drive, Ultrasonic Transducer Drive, Medical Ultrasound, Wireless Power Transmission，Ultrasonic Non-destructive Testing， Focused Ultrasound

Xi'an Aigtek Electronic Technology Co., Ltd.