ATA-7020 High Voltage Amplifier

Product catalog summary

Introduction
The ATA-7020 is a high voltage amplifier designed for amplifying both AC and DC signals. It features a single-ended output with a maximum voltage of 4kVp-p (±2kVp) and can drive high-voltage loads. The amplifier offers digitally adjustable voltage gain, allowing for convenient operation and the ability to save frequently used settings.

Specifications

Model: ATA-7020
Number of Channels: 1
Output Type: Single-ended
Bandwidth (-3 dB): DC~30kHz
Maximum Output Voltage: 4kVp-p (±2kVp)
Maximum Output Current: 15mAp (DC~50Hz), 30mAp (>50Hz)
Maximum Output Power: 60Wp
Voltage Gain: x0~1000
Input Impedance: 10kΩ
Output Impedance: 1kΩ
Slew Rate: ≥ 267V/μs
Output Voltage Error: ≤ ±1% @(DC, 2kV)
Total Harmonic Distortion (THD): ≤ 1%@1kHz, 3.2kVp-p
Output Voltage Zero Drift: ≤ ±1V
Output Interface: SHV RF connector
Output Protection: Over Current Protection
Power Supply Voltage: AC 220V±10%, 50Hz
Operating Temperature: 0°C ~ 45°C
Storage Temperature: -20°C ~ 50°C
Working Humidity: ≤ 80% RH, non-condensing
Warranty: 1 year
Dimensions: 442*164*574mm (W*H*D)

Features
The amplifier includes an LCD panel display for dynamic status and parameter monitoring, input via a BNC connector, and output via an SHV RF connector. It also features a 1/1000 monitor port for real-time voltage monitoring using an oscilloscope.

Accessories
The product comes with a power cable, BNC cables, a high voltage output cable set, a USB cable, a fuse, a user manual, a usage guide, a product qualification certificate, a calibration certificate, and a packing list.

Catalog excerpts

Xi'an Aigtek Electronic Technology Co., Ltd. ATA-7020 High Voltage Amplifier  Single channel  Bandwidth (-3dB): DC~30kHz  Maximum Output Voltage: 4kVp-p (±2kVp)  Maximum Output Current: 30mAp  Slew Rate: ≥267V/μs INTRODUCTION The ATA-7020 is an ideal high voltage amplifier capable of amplifying both AC and DC signals.It provides single-ended output up to 4kVp-p (±2kVp) and can drive high-voltage loads. The voltage gain is digitally adjustable, and frequently used settings can be saved with a single click, offering convenient and straightforward operation. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. INPUT Input via a BNC connector. VOLTAGE GAIN The voltage gain is digitally adjustable from x0 to x1000. Combined with the gain display on the LCD panel, the voltage can be quickly and precisely adjusted as needed. OUTPUT Output via an SHV RF connector, with a maximum output voltage of 4kVp-p (±2kVp) and a maximum output current of 30mAp. MONITOR 1/1000 Monitor: This port voltage is 1/1000 of the output port voltage. The monitoring port uses a BNC connector and can be directly connected to an oscilloscope for real-time monitoring of the output voltage.

Open the catalog to page 1