ATA-7015B High Voltage Amplifier

Product catalog summary

Introduction
The ATA-7015B is a high voltage amplifier designed for amplifying both AC and DC signals. It offers a four-quadrant output with a maximum voltage of 3kVp-p (±1.5kVp) and is capable of driving capacitive or inductive loads with stable positive and negative voltage and current.

Specifications

Bandwidth: DC~40kHz
Maximum Output Voltage: 3kVp-p (±1.5kVp)
Maximum Output Current: 20mAp (DC~50Hz), 40mAp (>50Hz)
Slew Rate: ≥266V/μs
Voltage Gain: x0~1000 (adjustable in 1 or 10 step increments)
Output Protection: Short Circuit Protection, Over Current Protection
Power Supply: AC110~240V, 50/60Hz
Dimensions: 440*149*535mm (W*H*D)

Control and Operation
The high-voltage output is managed via a dedicated output switch and a BNC enable connector. The device features a user-friendly interface with digital adjustment of voltage gain and one-click saving of settings.

Output Protection
The amplifier includes a single-shot protection mode that cuts off output in case of short-circuit, making it suitable for applications with large current fluctuations.

Dynamic Response Adjustment
A rotary panel potentiometer allows for dynamic adjustment to optimize AC response for different load parameters.

Applications
The ATA-7015B is suitable for various applications including material polarization, dielectric elastomers, plasma, electrostatic deflection, electrohydrodynamic printing, high voltage cable testing, electrophotography, and laser modulation.

Accessories
The product comes with a power cable, BNC cables, SHV to alligator clip high voltage output cable, USB cable, fuse, tuning tool, user manual, usage guide, product qualification certificate, calibration certificate, and packing list.

Catalog excerpts

Xi'an Aigtek Electronic Technology Co., Ltd. ATA-7015B High Voltage Amplifier  Bandwidth (-3dB): DC~40kHz  Maximum Output Voltage: 3kVp-p (±1.5kVp)  Maximum Output Current: 40mAp  Slew Rate: ≥266V/μs  Short Circuit Protection, Over Current Protection INTRODUCTION The ATA-7015B is an ideal high voltage amplifier capable of amplifying both AC and DC signals.It features four-quadrant output with a maximum voltage of 3kVp-p (±1.5kVp), and can stably provide both positive and negative voltage and current to drive capacitive or inductive loads. CONTROL The high-voltage output is controlled via a dedicated output switch in conjunction with a BNC enable connector. When the BNC shorting cap is connected, the device is in the output ON state. When the BNC shorting cap is removed, the device is in the output OFF state, and the control panel displays UNABLE OUTPUT_OFF. VOLTAGE GAIN Voltage gain can be digitally adjusted in 1step or 10step increments. One-click saving of commonly used settings makes operation more convenient and user-friendly. Combined with the gain display on the LCD panel, the voltage can be quickly and precisely adjusted as needed. OUTPUT PROTECTION In the single-shot protection output mode, even if the output is short-circuited due to load breakdown, the device will cut off the output, making it highly suitable for capacitive loads or application scenarios with large current fluctuations. DYNAMIC RESPONSE ADJUSTMENT Dynamic adjustment using a one-turn rotary panel potentiometer optimizes AC response for various load parameters. APPLICATIONS Material Polarization / Dielectric Elastomers /Plasma / Electrostatic Deflection / Electrohydrodynamic Printing / High Voltage Cable Testing / Electrophotography / Laser Modulation

Open the catalog to page 1