ATA-315 Power Amplifier

Product catalog summary

Introduction
The ATA-315 is a single-channel power amplifier designed for seamless signal amplification with mainstream signal generators. It offers a maximum output voltage of 850 Vp-p (±425 Vp) and a maximum output current of 2.12 Ap.

Specifications

Output Type: Single-ended Output
Bandwidth: 10kHz~150kHz (-3dB)
Maximum Output Voltage: 850 Vp-p (±425 Vp)
Maximum Output Current: 2.12 Ap
Maximum Output Power: 901 Wp
Voltage Gain: 0~300x (adjustable in 0.1 or 1 step)
Input Impedance: 10kΩ
Output Impedance: 200Ω
Input Amplitude: 0~10 Vp-p MAX
Output Voltage Error: ≤ ±3% FS @ 30 kHz
Voltage Monitoring: 10mV/V (±5% @ Output, FS)
Current Monitoring: 1V/A (±5% @ Output, FS)
Protection: Over Current and Over Temperature Protection
Power Supply Voltage: AC110~240V, 50/60Hz
Operating Temperature: 0°C ~ 45°C
Storage Temperature: -20°C ~ 50°C
Working Humidity: ≤ 80% RH, non-condensing
Dimensions: 440*149*453mm (W*H*D)
Warranty: 1 year

Features
The amplifier features an LCD panel display for dynamic status and parameter visualization, a BNC input interface, and banana socket output interface. It includes monitoring ports for real-time voltage and current monitoring via an oscilloscope.

Accessories
The package includes a power cable, BNC cables, output cable set, USB cable, fuse, user manual, usage guide, product qualification certificate, calibration certificate, and packing list.

Catalog excerpts

Xi'an Aigtek Electronic Technology Co., Ltd. ATA-315 Power Amplifier  Maximum Output Voltage: 850 Vp-p (±425 Vp)  Bandwidth (-3dB): 10kHz~150kHz  Voltage Gain: 0~300x  Input Impedance: 10kΩ INTRODUCTION The ATA-315 is an ideal single-channel power amplifier. With a maximum output voltage of 850Vp-p (±425Vp) and a maximum output current of 2.12Ap,it is perfectly compatible with mainstream signal generators, achieving seamless signal amplification. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. VOLTAGE GAIN The voltage gain is digitally adjustable from 0~300x, with two modes: coarse adjustment (1 step) and fine adjustment (0.1 step). Combined with the LCD panel display, it enables quick and precise adjustment to the desired voltage value. INPUT The input interface uses a BNC interface, supporting input waveform amplitudes from 0~10 Vp-p MAX. The input impedance 10kΩ. OUTPUT Output Interface: Banana socket, with a maximum output voltage of 850 Vp-p (±425 Vp), and a maximum output current of 2.12 Ap. MONITORING PORTS 10mV/V Monitor: This port is for voltage monitoring and can be connected to an oscilloscope for real-time monitoring of the output voltage. 1V/A Monitor: This port is for current monitoring and can be connected to an oscilloscope for real-time monitoring of the output current.

Open the catalog to page 1