Aigtek Wide Band Amplifier ATA-1372A

Product catalog summary

Introduction
The ATA-1372A is a single-channel wideband amplifier designed for amplifying both AC and DC signals. It offers a maximum output voltage of 70 Vp-p (±35 Vp) and a maximum output current of 2 Ap for frequencies above 50 Hz. The amplifier features digitally adjustable voltage gain, allowing precise tuning and easy operation. It is compatible with mainstream signal generators.

Specifications

Output Type: Single-ended
Bandwidth: DC~3MHz (-3dB)
Maximum Output Voltage: 70 Vp-p (±35 Vp)
Maximum Output Current: 1 Ap (DC~50 Hz), 2 Ap (>50 Hz)
Voltage Gain: x0~40 (adjustable in 0.1 or 1 step)
Slew Rate: ≥ 467 V/μs
Input Impedance: 50Ω / 10kΩ
Output Impedance: ≤ (2Ω＋0.4μH)
Protection: Over current and over temperature
Power Supply: AC110V~240V, 50/60Hz
Operating Temperature: 0°C ~ 45°C
Dimensions: 330*149*398mm

Features
The amplifier includes an LCD panel display for easy monitoring of device status and parameters. It supports voltage gain adjustments from x0 to x40, with both coarse and fine tuning options. The input and output interfaces use BNC connectors, and the device includes monitoring ports for real-time voltage and current monitoring.

Accessories
The package includes a power cable, BNC cables, a BNC-to-alligator clip cable, a USB cable, a fuse, a user manual, a usage guide, a product qualification certificate, a calibration certificate, and a packing list.

Catalog excerpts

Xi'an Aigtek Electronic Technology Co., Ltd. ATA-1372A Wide Band Amplifier  Single Channel  Maximum Output Voltage:70 Vp-p (±35 Vp)  Maximum Output Current: 2Ap  Bandwidth (-3dB): DC~3MHz  Slew Rate: ≥467V/μs INTRODUCTION The ATA-1372A is a single-channel wideband amplifier capable of amplifying both AC and DC signals. It features a maximum output voltage of 70 Vp-p (±35 Vp) and a maximum output current of 2 Ap (>50 Hz). The digitally adjustable voltage gain allows precise tuning, with one-click saving of settings, offering a simple and user-friendly operation. It is compatible with mainstream signal generators for seamless signal amplification. LCD PANEL DISPLAY The ATA-1372A features an LCD panel display that dynamically shows device status and parameters. The interface is intuitive, clear, and easy to understand, ensuring a user-friendly experience. VOLTAGE GAIN The voltage gain is digitally adjustable from x0 to x40, with two modes: coarse adjustment (1 step) and fine adjustment (0.1 step). Combined with the LCD panel display, it enables quick and precise adjustment to the desired voltage value. INPUT The input uses a BNC interface with selectable impedance of 50Ω or 10kΩ, perfectly matching both high and low impedance signal sources. OUTPUT The output uses a BNC interface with a maximum output voltage of 70 Vp-p (±35 Vp) and a maximum output current of 2 Ap. MONITORING PORTS 100mV/V Monitor: This port is for voltage monitoring and can be connected to an oscilloscope for real-time monitoring of the output voltage. 1V/A Monitor: This port is for current monitoring and can be connected to an oscilloscope for real-time monitoring of the output current.

Open the catalog to page 1