Aigtek Wide Band Amplifier ATA-1200C

Product catalog summary

Introduction
The ATA-1200C is a single-channel wideband amplifier designed for amplifying both AC and DC signals. It offers a maximum output voltage of 30 Vp-p (±15 Vp) and a maximum output current of 1 Ap for frequencies above 50 Hz. The amplifier features digitally adjustable voltage gain for precise tuning and is compatible with mainstream signal generators.

Specifications

Output Type: Single-ended
Bandwidth: DC~25MHz
Maximum Output Voltage: 30 Vp-p (±15 Vp)
Maximum Output Current: 500mAp (DC~50Hz), 1Ap (>50Hz)
Voltage Gain: 0~20dB in 0.5dB steps
Slew Rate: ≥ 1666V/μs
Input Impedance: 50Ω / 1MΩ
Output Impedance: 2.5Ω / 50Ω (customizable)
Signal-to-Noise Ratio: ≥ 80dB
Protection: Over current and short circuit protection

Features
The amplifier includes an LCD panel for displaying device status and parameters, ensuring a user-friendly interface. The input and output interfaces use BNC connectors, with selectable input impedance to match different signal sources.

Environmental and Physical Specifications

Operating Temperature: 0°C ~ 45°C
Storage Temperature: -20°C ~ 50°C
Working Humidity: ≤ 80% RH, non-condensing
Dimensions: 330*149*401mm (W*H*D)
Power Supply: AC110/220V, 50/60Hz

Accessories
The product comes with a power cable, BNC cables, a BNC-to-alligator clip cable, a USB cable, a fuse, a user manual, a usage guide, a product qualification certificate, a calibration certificate, and a packing list.

Catalog excerpts

Xi'an Aigtek Electronic Technology Co., Ltd. ATA-1200C Wide Band Amplifier  Single-Ended Output  Maximum Output Voltage: 30 Vp-p (±15 Vp)  Maximum Output Current: 1Ap  Bandwidth (-3dB): DC~25MHz  Slew Rate:≥1666V/μs INTRODUCTION The ATA-1200C is a single-channel wideband amplifier capable of amplifying both AC and DC signals. It features a maximum output voltage of 30 Vp-p (±15 Vp) and a maximum output current of 1 Ap (>50 Hz). The digitally adjustable voltage gain allows precise tuning, with one-click saving of settings, offering a simple and user-friendly operation. It is compatible with mainstream signal generators for seamless signal amplification. LCD PANEL DISPLAY The ATA-1200C utilizes an LCD panel display, dynamically showing device status and parameters, ensuring a clear and intuitive interface. VOLTAGE GAIN Voltage gain digitally adjustable from 0 to 20 dB with 0.5 dB steps, combined with LCD display for quick and precise adjustments to the desired voltage. INPUT The input uses a BNC interface with selectable input impedance of 50Ω or 1MΩ, perfectly matching high and low impedance signal sources. OUTPUT The output uses a BNC interface with a maximum output voltage of 30 Vp-p (±15 Vp) and a maximum output current of 1 Ap.

Open the catalog to page 1