Xi'an Aigtek Electronic Technology Co., Ltd. ATA-2161 High Voltage Amplifier  Single Channel  Maximum Output Voltage:1600 Vp-p (±800 Vp)  Maximum Output Current: 40mAp  Bandwidth (-3dB): DC~150kHz  Slew Rate :≥534 V/μs INTRODUCTION The ATA-2161 is an ideal single-channel high-voltage amplifier capable of amplifying both AC and DC signals. It delivers a maximum output of 1600 Vp-p (±800 Vp), suitable for driving high-voltage loads. The digitally adjustable voltage gain allows precise tuning, with one-click saving of common settings, offering a simple and user-friendly operation. It is compatible with mainstream signal generators for seamless signal amplification. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. VOLTAGE GAIN The voltage gain is digitally adjustable from x0 to x240, with two modes: coarse adjustment (1 step) and fine adjustment (0.1 step). Combined with the LCD panel display, it enables quick and precise adjustment to the desired voltage value. INPUT The input uses a BNC interface with selectable impedance of 50Ω or 5kΩ, perfectly matching both high and low impedance signal sources. OUTPUT The output uses banana sockets, with a maximum output voltage of 1600 Vp-p (±800 Vp) and a maximum output current of 40 mAp. MONITORING PORTS 10mV/V Monitor: This port voltage is 1/100 of the output port voltage. The monitoring port uses a BNC connector and can be directly connected to an oscilloscope for real-time monitoring of the output voltage.

Xi'an Aigtek Electronic Technology Co., Ltd.