Aigtek High Voltage Amplifier ATA-2041

Product catalog summary

Introduction
The ATA-2041 is a single-channel high-voltage amplifier designed for amplifying both AC and DC signals. It offers a maximum output of 400 Vp-p (±200 Vp) and is suitable for high-voltage loads. The amplifier features digitally adjustable voltage gain for precise tuning and is compatible with mainstream signal generators.

Specifications

Number of Channels: 1
Output Type: Single-ended
Bandwidth: DC~500kHz
Maximum Output Voltage: 400 Vp-p (±200 Vp)
Maximum Output Current: 50mAp (DC~50Hz), 100mAp (>50Hz)
Voltage Gain: 0~60x (0.1 step/1 step)
Slew Rate: ≥ 445 V/μs
Input Impedance: 50Ω / 5kΩ
Output Impedance: 50Ω/2.5kΩ
Output Voltage Error: ≤ ±3% FS @ 1 kHz
Total Harmonic Distortion (THD): ≤ 0.1% @ 1kHz, 100Vp-p
Signal-to-Noise Ratio: ≥ 80dB
Power Supply Voltage: AC220V±10%, 50Hz
Operating Temperature: 0°C ~ 45°C
Dimensions: 366*164*369mm (W*H*D)

Features
The amplifier includes an LCD panel display for dynamic status and parameter monitoring. It has a BNC interface for input with selectable impedance and banana sockets for output. Monitoring ports are available for real-time voltage and current monitoring using an oscilloscope.

Protection and Safety
The device includes overcurrent protection and a fuse (2A/250V) for safety. The signal ground is connected to the chassis and power line ground.

Accessories
The package includes a power cable, BNC cables, red-black output cable, USB cable, fuse, user manual, usage guide, product qualification certificate, calibration certificate, and packing list.

Contact Information
For more information, contact Xi'an Aigtek Electronic Technology Co., Ltd. at +86-29-88865020.

Catalog excerpts

Aigtek High Voltage Amplifier ATA-2041-1

Xi'an Aigtek Electronic Technology Co., Ltd. ATA-2041 High Voltage Amplifier  Single Channel  Maximum Output Voltage: 400 Vp-p (±200 Vp)  Maximum Output Current: 100mAp  Bandwidth (-3dB): DC~500kHz  Slew Rate: ≥445 V/μs INTRODUCTION The ATA-2041 is an ideal single-channel high-voltage amplifier capable of amplifying both AC and DC signals. It delivers a maximum output of 400 Vp-p (±200 Vp), suitable for driving high-voltage loads. The digitally adjustable voltage gain allows precise tuning, with one-click saving of common settings, offering a simple and user-friendly operation. It is compatible with mainstream signal generators for seamless signal amplification. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. VOLTAGE GAIN The voltage gain is digitally adjustable from 0~60x, with two modes: coarse adjustment (1 step) and fine adjustment (0.1 step). Combined with the LCD panel display, it enables quick and precise adjustment to the desired voltage value. INPUT The input uses a BNC interface with selectable impedance of 50Ω or 5kΩ, perfectly matching both high and low impedance signal sources. OUTPUT The output uses banana sockets, with a maximum output voltage of 400 Vp-p (±200 Vp) and a maximum output current of 100 mAp. MONITORING PORTS 10mV/V Monitor: This port voltage is 1/100 of the output port voltage. The monitoring port uses a BNC connector and can be directly connected to an oscilloscope for real-time monitoring of the output voltage. 10V/A Monitor: The monitoring port voltage is 10 times the output current. The monitoring port uses a BNC connector and can be directly connected to an oscilloscope for real-time monitoring of the output current.

Open the catalog to page 1