Aigtek High Voltage Amplifier ATA-2032

Product catalog summary

Introduction
The ATA-2032 is a dual-channel high-voltage amplifier designed for amplifying both AC and DC signals. It offers a maximum output of 300 Vp-p (±150 Vp) and is suitable for high-voltage loads. The amplifier features digitally adjustable voltage gain for precise tuning and is compatible with mainstream signal generators.

Specifications

Channels: 2
Output Type: Single-ended
Bandwidth: DC~500kHz
Maximum Output Voltage: 300 Vp-p (±150 Vp)
Maximum Output Current: 60mAp (DC~50Hz), 120mAp (>50Hz)
Voltage Gain: 0~50x (0.1 step/1 step)
Slew Rate: ≥ 334 V/μs
Input Impedance: 50Ω / 5kΩ
Output Impedance: 50Ω/2.5kΩ
Output Voltage Error: ≤ ±3% FS @ 1 kHz
THD: ≤ 0.1%@1kHz, 100Vp-p
Signal-to-Noise Ratio: ≥ 80dB
Power Supply: AC220V±10%, 50Hz
Operating Temperature: 0°C ~ 45°C
Dimensions: 366*164*369mm (W*H*D)

Features
The amplifier includes an LCD panel for displaying device status and parameters, a BNC interface for input with selectable impedance, and banana sockets for output. It also has monitoring ports for real-time voltage and current monitoring using an oscilloscope.

Protection and Warranty
The device includes over-current protection and comes with a 1-year warranty. It is supplied with various accessories including cables, a user manual, and certificates.

Catalog excerpts

Aigtek High Voltage Amplifier ATA-2032-1

Xi'an Aigtek Electronic Technology Co., Ltd. ATA-2032 High Voltage Amplifier  Dual Channel  Maximum Output Voltage: 300 Vp-p (±150 Vp)  Maximum Output Current: 120mAp  Bandwidth (-3dB): DC~500kHz  Slew Rate: ≥334 V/μs INTRODUCTION The ATA-2032 is an ideal dual-channel high-voltage amplifier capable of amplifying both AC and DC signals. It delivers a maximum output of 300 Vp-p (±150 Vp), suitable for driving high-voltage loads. The digitally adjustable voltage gain allows precise tuning, with one-click saving of common settings, offering a simple and user-friendly operation. It is compatible with mainstream signal generators for seamless signal amplification. LCD PANEL DISPLAY The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface. VOLTAGE GAIN The voltage gain is digitally adjustable from 0~50x, with two modes: coarse adjustment (1 step) and fine adjustment (0.1 step). Combined with the LCD panel display, it enables quick and precise adjustment to the desired voltage value. INPUT The input uses a BNC interface with selectable impedance of 50Ω or 5kΩ, perfectly matching both high and low impedance signal sources. OUTPUT The output uses banana sockets, with a maximum output voltage of 300 Vp-p (±150 Vp) and a maximum output current of 120 mAp. MONITORING PORTS 10mV/V Monitor: This port voltage is 1/100 of the output port voltage. The monitoring port uses a BNC connector and can be directly connected to an oscilloscope for real-time monitoring of the output voltage. 10V/A Monitor: The monitoring port voltage is 10 times the output current. The monitoring port uses a BNC connector and can be directly connected to an oscilloscope for real-time monitoring of the output current.

Open the catalog to page 1