Gammadrive SE Linear Actuator

Product catalog summary

Description
The Gammadrive actuator, designed and manufactured in Sweden, is ideal for light industrial and furniture applications. It features a compact motor housing and multiple mounting options, allowing for easy adaptation to various applications.

Key Features

Short lead times
Robust construction
Long lifespan

Options

Push
Dual hall sensors
Limit switches
Molex 8-pin connector
2 m cable length
Various mounting options
Control units with/without battery
DIN-connector

Technical Data

Models: GZ-SW-XXX-YYY-D2-18-H, GZ-SW-XXX-YYY-B2-18-H, GZ-SW-XXX-YYY-B1-18-H
Max Push Force: 1,500 N, 2,500 N, 4,000 N
Self-locking Force: 1,500 N, 2,500 N, 4,000 N
Speed at Max Force: 20 mm/s, 10 mm/s, 5 mm/s
Stroke: 50 mm to 500 mm in 50 mm increments
Retracted Length: Stroke + minimum 124 mm
Duty Cycle: 10% (1 min ON / 9 min OFF)
Voltage: 24 VDC
Ambient Temperature: +10°C to +40°C
Current at Max Force: 4.5 A, 4 A, 4.5 A
IP Class: IP 20

Mounting Options

Option 1: Retracted length = Stroke + 158 mm
Option 2: Retracted length = Stroke + 143 mm
Option 3: Retracted length = Stroke + 139 mm
Option 4: Retracted length = Stroke + 124 mm

Recommended Control Units

Compact-3: Maximum-efficiency SMPS, 230VAC (EU) or 120VAC (US), 24V - 33V output, 3 motor exits, cascading up to 4 units
SMARTneo: Cost-effective SMPS, 230VAC (EU), 24V-33V output, 2 motor exits, cascading up to 2 units

Ordering Information
Refer to the ordering key for specific configurations.

Additional Information
Before using the products, consult the general terms & conditions and operating manuals. Suitability and lifetime depend on the application and must be tested by each user. Specifications may change without notice. All components are the property of Phoenix Mecano AB and require permission for use.

Contact Information
Phoenix Mecano AB
Phone: +46 470 717950
Email: [email protected]
Website: www.phoenix-mecano.se

Catalog excerpts

Description Designed and manufactured in Sweden, the Gammadrive actuator is the optimal choice for light industrial and furniture applications. With the small motor housing and the multiple mounting options to choose from, Gammadrive can easily be adapted to fit various applications. Short lead times © Very robust Q Long lifetime Features Push Dual hall sensors Limit switches Molex 8-pin connector 2 m cable length Various mounting options Control units with/without battery * See diagrams on page 3 ** Only applied when connected by short circuit

Open the catalog to page 2

Mounting options 100 = Option 1 Retracted length = Stroke + 158 mm 200 = Option 2 Retracted length = Stroke + 143 mm 300 = Option 3 Retracted length = Stroke + 139 mm 400 = Option 4 Retracted length = Stroke + 124 mm

Open the catalog to page 3

Recommended control units Compact-3 Maximum-efficiency SMPS 230VAC (EU) or 120VAC (US) versions 24V - 33V output 3 motor exits (max 5-8A/motor exit) Cascading: connect up to 4 Compact-3 Control two motor groups separately with the same control unit Cost-effective SMPS 230VAC (EU) 24V-33V output 2 motor exits (max 5A/motor exit) Cascading: connect up to 2 SMARTneo Control two motor groups separately with the same control unit

Open the catalog to page 4

Sensor type Motor voltage Gear ratio Spindle type Stroke length [mm] Retracted length [mm] Housing colour - Connector type: - Identification number - Mounting option - Linear actuator model Actuator model:

Open the catalog to page 5

Before use of products, see general terms & conditions and operating manuals. Lifetime and suitability are depending on application and must therefore be tested by each user. Specifications subject to change without prior notice. All components in this datasheet are property of Phoenix Mecano AB and may therefore not be used without permission. Copyright © Phoenix Mecano AB 2024.01

Open the catalog to page 6

Gammadrive SE Linear Actuator

Gammadrive SE Linear Actuator

Catalog excerpts

All X2 Technology catalogs and technical brochures